Panasonic P2HD VariCam AJ-HPX3700G Operating Instructions Manual page 95

To read data on an SD memory card
1
Navigate the menu to the <SD CARD READ/WRITE>
screen.
To select a file number
2
Turn the jog dial button to move the arrow (cursor) to the
menu option R.SELECT. Then, press the dial button.

3
Turn the jog dial button to select a desired number (1 -
8). Then, press the dial button.
To read data on a selected file
4
Turn the jog dial button to move the arrow (cursor) to the
option READ.

5
Press the jog dial button to display the following
message:

6
Turn the jog dial button to move the arrow (cursor) to
YES. Then, press the dial button.
When the data has been read, the following message
appears:
The data will not be read if any of the following messages
appears when the jog dial button is pressed:
Error message
READ NG
NO CARD
(No SD memory card inserted.)
READ NG
FORMAT ERROR
(SD memory card not properly
formatted.)
READ NG
NO FILE
(No file found.)
READ NG
ERROR
(SD memory card not
readable.)
READ NG
CANNOT ACCESS
(SD memory card not
accessible.)
7
To exit the menu, press the MENU button.
The settings menu will be replaced by status indications
for the unit.
Adjustments and Settings for Recording: Handling data
Remedy
Insert an SD memory card.
The card has not been
formatted using the unit.
Replace the card.
Write file data.
Only data written with the unit is
readable.
Example: The SD memory card
is not accessible because it is
being played back.
After the operation in process,
read data.
95