Warning And Status Display Functions - Panasonic P2HD VariCam AJ-HPX3700G Operating Instructions Manual

Warning and Status Display Functions

7
1. Back tally lamp
When the 2. BACK TALLY switch is set to [ON], the
lamp behaves in the same way as the front tally lamp at
the viewfinder.
2. BACK TALLY switch
This switch controls the action of the 1. Back and
8. Rear tally lamps.
ON: Back and rear tally lamps enabled.
OFF: Back and rear tally lamps disabled.
3. WARNING lamp
This lamp starts blinking or lights up if something
unusual occurs in the memory.
4. USB lamp
Stays on when the unit is in USB mode.
5. ACCESS lamp
Blinks when the unit is in recording or playback mode or
when a P2 card is being accessed, or stays on when a
recordable P2 card is inserted.
6. LIGHT button
Use this button to control illumination of the display
window.
Alternately pressing this button toggles illumination of
the 7. Display window on or off.
26
Parts and their Functions: Warning and Status Display Functions
7. Display window
This window displays warnings, battery-remaining level,
1
sound volume, time data, and other information.
2
Note
6
When the battery is installed, the unit indicates the data
even if the power is turned off. To turn off the data
indications to keep the battery from being discharged,
specify "OFF" for the menu option P. OFF LCD
DISPLAY found in the <TC/UB> screen on the MAIN
3
OPERATION page.
4
5
8. Rear tally lamp
When the 2. BACK TALLY switch is set on [ON], the rear
tally lamp behaves in the same way as the back tally
lamp.
8