Panasonic P2HD VariCam AJ-HPX3700G Operating Instructions Manual page 83

Information Item
26. Iris, F value NC
OPEN
F1.7 - F16
CLOSE
27. Zoom indication Z00 - Z99
28. INTERVAL REC/
PRE
RECORDING
indication/SD
memory card
P-REC (blink)
remaining free
space
END
29/43. VF-GAMMA
30/44. MON-GAMMA M
31. F-REC DYNAMIC 200%
LVL indication 300%
400%
500%
600%
32. F-REC BLACK 00% - 30%
STR LVL
indication
33. MASTER 0.30 - 0.75
GAMMA
indication
34. BLACK GAMMA –8 - OFF - +8
setting
Indication
Lens cable is not connected.
Lens iris is at maximum.
Lens iris value
Lens iris closed.
Note
These indications are provided when the lens is capable of indicating the iris
value. When the iris is being overridden, they blink.
Zoom degree is indicated. This indication is not provided for a lens that does
not return the zoom position, even if the indication is set to on.
Displayed before and after operation during INTERVAL REC mode.
(blink) Displayed during INTERVAL REC operation.
(blink) Displays the pause time before the next recording during INTERVAL REC.
h m/ s
Indicated while pre-recorded video and audio are being recorded on the P2
card. If the user button is set to perform the PRE RECORDING function, either
"P-REC OFF" or the specified duration "1s - 8s" is displayed when the PRE
RECORDING mode is switched by pressing the user button.
If a video encoder card (AJ-YAX800G, optional) is attached, the remaining free
h m space on the SD Memory card will be displayed when the MODE CHECK
button is pressed during proxy recording.
"END" is displayed when there is no remaining free space.
This is only enabled when "FILM-REC" has been selected in the GAMMA
MODE SEL menu option. Video shot in the FILM-REC gamma mode is
converted to high-contrast video and supplied to the viewfinder. GAMMA
MODE SEL can be selected from the screen <GAMMA> in the PAINT page.
This is only enabled when "FILM-REC" has been selected in the GAMMA
MODE SEL menu option. Video shot in the FILM-REC gamma mode is
converted to high-contrast video and supplied to the MON OUT output.
GAMMA MODE SEL can be selected from the screen <GAMMA> in the PAINT
page.
This indicates the dynamic range at FILM-REC.
At other times, it indicates knee-slope.
This indicates the level of black stretch at FILM-REC.
At other times, it indicates knee-point.
This indicates the master gamma level.
This indicates the gamma curve setting for dark locations on the screen.
Adjustments and Settings for Recording: Viewfinder Screen Status Displays
Status
83