Panasonic P2HD VariCam AJ-HPX3700G Operating Instructions Manual page 150

Memory card camera recorder
Hide thumbs Also See for P2HD VariCam AJ-HPX3700G:
Table of Contents

Advertisement

8. MODEL
This section indicates the model of the P2 card that
originally contained data on the partition.
Note
Press the cursor button ( ) to switch to the PARTITION
NAME. Press the [ ] button to return to the original
model name display.
Enter the PARTITION NAME from the soft keyboard by
selecting CHANGE PARTITION NAME in the
OPERATION menu while the thumbnail of the hard disk
drive is displayed. (Max. 20 characters)
9. DATE/TIME
This section indicates the date and time the data on the
partition was recorded.
10. SERIAL
This section indicates the serial number of the P2 card
that originally contained the data on the partition.
150
Connection with external device: Connection with external devices using the USB 2.0 port
11. VERIFY
This section indicates the verification setting and results
at the time the data on the partition was recorded.
ON/FINISHED:
Verification was performed and the results agreed.
ON/FAILED:
Verification was performed and the results did not
agree.
OFF:
No verification was performed.
- - -:
No verification information is available.
Notes
Even for a FAT-type hard disk drive, the 1001st or
later clips are not shown.
For a FAT-formatted hard disk drive, the information
about only the first partition is shown.
For a P2 STORE (AJ-PCS060G) that has an invalid
partition, that partition information is shown in gray.
12. NAME
This section indicates the PARTITION NAME.
Formatting a hard disk drive
1
Switch the mode to USB HOST.
For more information, see [Switching to the USB HOST
mode] (page 148).
2
Connect the hard disk drive via USB.
3
Press the THUMBNAIL button to display the thumbnail
screen.
4
Press the THUMBNAIL MENU button and select HDD
EXPLORE from the thumbnail menu. The display
provides a screen that shows the information about the
hard disk drive.
5
From the menu, select OPERATION
and select YES using the cursor buttons and SET
button. Then, the confirmation message is displayed
again. Select YES.
6
The unit starts formatting the hard disk drive. Once
formatted, the hard disk drive can be treated as a
TYPE S HDD.
Note
Formatting a hard disk drive erases all contents of it.
Note that you cannot erase the contents of certain
partitions by specifying them.
FORMAT (HDD)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P2hd aj-p2c064agP2hd aj-yax800g

Table of Contents