Panasonic P2HD VariCam AJ-HPX3700G Operating Instructions Manual page 106

To read the CAC FILE from an SD memory card
1
Insert the SD memory card with the CAC file
downloaded from our support website.
For downloading, refer to the following URL.
https://eww.pavc.panasonic.co.jp/pro-av/
2
Open the <CAC FILE CARD READ> screen from the
FILE page via the menu operation.
3
Select TITLE READ using the jog dial button and then
press the jog dial button.
The lens product number is indicated in the TITLE
column.

4
Select CARD FILE SELECT using the jog dial button
and then press the jog dial button.
5
Select the TITLE No. to be read and press the jog dial
button.
6
Select READ using the jog dial button and then press
the jog dial button.
The following screen is displayed.

106
Adjustments and Settings for Recording: Chromatic Aberration Compensation (CAC)
7
Select YES using the jog dial button and then press the
jog dial button.
The CAC file for the lens selected in step 4 is recorded
in memory on the unit.
If EMPTY is selected in MEM STORE NO.: EMPTY/1/
2... at this time, data are recorded in available space of
the CAC file numbers on the unit. If "1" is selected, the
data will overwrite the contents of CAC file No. 1.
If the following messages are displayed when the jog
dial button is pressed, the data cannot be read out.
Error message
READ NG
NO CARD
(No SD memory card is
inserted)
READ NG
NO FILE
(No file is available)
READ NG
ERROR
(Data cannot be read out)
READ NG
CANNOT ACCESS
(It is impossible to access the
data)
READ NG
FILE DATA INVALID
(File data are abnormal)
READ NG
FILE MEMORY FULL
(Memory is full)
8
To store multiple CAC files in the unit, repeat steps 3 to
7.
9
To close the menu operation, press the MENU button.
The setting menu disappears, and the current state of
the unit is displayed.
Notes
The unit is capable of recording 32 CAC files. When the
CAC file is full, delete any of the CAC files.
While the SD memory card is inserted, the busy lamp for
the SD memory card blinks, which is normal and not a
malfunction.
Measures
Insert an SD memory card.
Select a file containing data and
perform the read operation
again.
Insert an SD memory card
again, and then perform the
read operation again.
It is impossible to access the SD
memory card while the card is in
use. After completion of the
respective operations, perform
the read operation again.
The written file data have errors.
Use the proper file data.
The memory is full, and new
data cannot be written on it.
Delete unnecessary CAC data
and then perform the write
operation again.