Table of Contents
Advertisement
TRENDnet User's Guide
There are a number of factors involved in successful camera installation. Follow the
suggested installation steps and go through the check lists. This guide will help you to
make your camera installation smooth and easy.
Plan for installation location
Setup Your Camera with CD
Hardware Installation
Plan for Installation
Viewing angle
The TV-IP312PI is a bullet camera with a focused viewing angle (70 horizontal) that
provides non-distorted and detailed images. Choose the location where has good angle
to shoot the image you expect to see. The motion detection area should also be
considered when installing the camera.
Weather Conditions
The camera is an outdoor dome camera, which fits most installations indoor and
outdoor. The camera can work under a wide range of weather conditions. For severe
weather conditions. Using the camera in milder weather conditions will help extend the
camera's life and preserve the quality of the camera image.
Moisture: Avoid damp or moist environments whenever you can. The camera is an IP66
grade water proof camera, and it will work in moist environments. However, rain may
affect the picture quality, especially at night, water may reflect the light from the infra-
red illumination and degrade picture quality.
Temperature: Camera works within a specified temperature range. Areas with severe
temperatures should be avoided when installing the camera. It's recommended that you
use an enclosure with a heater and blower if you plan on using this camera outside of the
specified temperature range.
© Copyright 2015 TRENDnet. All Rights Reserved.
Sunlight: Avoid direct sun light exposure. Direct sun light will damage the image sensor. If
sunlight is necessary for your viewing purposes, provide protection for the image sensor.
Lighting: Consider installing your camera faces the same direction of the light sources.
Shooting images with top-down position outdoor or next to the existing light source are
good choices. Avoid the light source if it creates a shade that darkens the viewing area.
Waterproof cap
The TV-IP312PI is IP66 weather rated camera. There is a set of network cable waterproof
cap that comes with the package. Run the network cable going through the cap and then
using crimp the tool to crimp the cable with an RJ-45 modular. Plug in the network cable
and then tighten the waterproof cap to prevent water running into the camera through
the cable.
TV-IP312PI
4
Advertisement
Table of Contents
