Table of Contents
Advertisement
TRENDnet User's Guide
maintain the maximum IR light distance and while
maintaining a clear picture when object is close by.
Default: On.
Max. Exposure Time:
Adjust this value for exposure time for each
picture. You can choose a value between 1/3
second to 1/100,000 second. The default value is
1/30 second exposure time for each picture.
Video Standard:
This is the base frequency for the video refresh rate. It
is recommended to set to the same frequency of your
local video standard (NTSC: 60, PAL: 50). Default: 60Hz.
Day/Night Switch:
Choose whether you want the camera to be set to the
day mode (color video) or night mode (IR enhanced
black/white video). You can manually set it to day
mode or night mode, adjust by lighting (Auto), or pre-
define schedule.
Day:
The speed dome displays color image. It is used for
normal lighting conditions.
Night:
© Copyright 2015 TRENDnet. All Rights Reserved.
The image will be black and white. Night mode can
increase the sensitivity in low light conditions.
Auto:
In Auto mode, the day mode and night mode can
switch automatically according to the light condition
of environment.
Schedule:
Use quick selection or enter the time down below.
Click OK to confirm the time you want to set.
Sensitivity:
Adjust the light sensor sensitivity.
Switch Time:
The time delayed to switch between Day/Night
modes. Longer switch time can prevent unnecessary
mode flipping if an object is blocking the light source
temporarily. Range: 5-120 seconds, default: 5
seconds.
Mirror:
Select from OFF or ON option to set the correct
direction of the camera view.
D-WDR:
This Digital Wide Dynamic Range feature helps to
D-WDR Level
improve the image quality under limited light source.
Higher value brings brighter images.
White Balance:
Choose a corresponding light source to fit the
environment.
TV-IP312PI
28
Advertisement
Table of Contents
