Table of Contents
Advertisement
TRENDnet User's Guide
Draw Area:
Click Draw Area button to start drawing. Click and
drag on the area you want to set up the motion
detection. You can draw up to 8 different areas.
Click Stop Drawing to stop drawing motion
detection areas.
The red grids represent the detection area.
Sensitivity:
Move the slider to adjust detection sensitivity.
Clear All:
Click this button to clear all the set up areas.
© Copyright 2015 TRENDnet. All Rights Reserved.
Arming Schedule
Edit:
Click Edit to define when you want the motion
detection works.
1. Select day of the week you want to edit the
2. Set the time period you want to enable
3. Click Copy to Week if you want the same
4. Select another day of the week by clicking on
Notification
Send Email:
Check this box to send an e-mail notification when
motion is detected. Go to Events / Email to setup
email account information.
TV-IP312PI
schedule.
motion detection. (Default is 0-24 hours, all
day).
daily schedule every day or you can select
other day of the week and click Copy to copy
the schedule of the day to other days.
its tab to set next schedule. Click OK when
you finished your setting.
33
Advertisement
Table of Contents
