TRENDnet User’s Guide TV‐IP314PI Cautions ........................7 Contents Installation Procedure .............. 8 Product Overview ................ 4 Plan for installation location ............ 8 Features ........................4 Viewing angle ......................8 Hardware .........................4 Weather Conditions ....................8 Adjustable Bracket ........................ 4 Setup Your Camera with CD ............. 9 PoE ............................. 4 Outdoor Ready .......................... 4 Hardware Installation .............. 12 Performance ......................4 Cabling ........................ 12 4 Megapixel .......................... 4 Waterproof cap .................... 12 Night Vision .......................... 4 Mount your camera .................... 12 Smart IR ............................. 4 Access your Camera with the Web Browser ........ 14 WDR ............................ 4 System Management and Default Settings ............ 14...
Page 3
TRENDnet User’s Guide TV‐IP314PI User Accounts ....................... 28 Email ........................ 48 Time Settings ...................... 28 Network Storage ................ 49 Daylight Savings .................... 29 Network Storage .................... 49 Live View Settings .................... 29 Storage Management ................... 51 Maintenance ...................... 30 FTP Server ...................... 52 Network Settings ................ 3 1 Appendix .................. 53 TCP/IP ........................ 31 Direct video access ‐ RTSP .................. 53 Port ........................ 32 Regulations .................. 53 DDNS ........................ 33 Federal Communication Commission Interference Statement ........ 53 PPPoE ........................ 33 RoHS ........................ 53...
TRENDnet User’s Guide TV‐IP314PI Camera Management Package Contents Multi‐Language Interface TV‐IP314PI package includes: Support for English, French, Spanish, German, and Russian • TV‐IP314PI • Quick Installation Guide Advanced Playback • CD‐ROM (Utility and User’s Guide) Advanced in‐camera archived video review functionality • Camera mounting hardware Storage • (Optional power adapter not included) SMB/CIFS support with notification if storage drive is full Motion Detection Create motion detection windows with separate sensitivity settings and event triggers Recording Schedule Drilling Template Mounting Screws ...
TRENDnet User’s Guide TV‐IP314PI Front View Mounting Holes Grounding Screw Lock Ring Reset Button Ambient Light Sensor IR LEDs Mounting Base Connectors Reset Button Push and hold the reset button then power on the camera. Keep holding the reset button for more than 10 seconds to reset configuration to factory default. Grounding Connects to electric ground. 10/100 PoE Network Port Screw ...
TRENDnet User’s Guide TV‐IP314PI Warnings Cautions Injury or equipment damage may be caused if any of these cautions are Serious injury or death may be caused if any of these warnings are neglected. neglected. Follow these precautions to prevent potential injury or material Follow these safety guards to prevent serious injury or death. damage. • If using the power adapter, please choose the power adapter that meets the safety extra low voltage (SELV) standard or IEC60950‐1 and • Make sure the power supply voltage is correct before using the Camera. Limited Power Source standard. • Do not drop the camera or subject to physical shock. ...
TRENDnet User’s Guide TV‐IP314PI Installation Procedure • Moisture: Avoid damp or moist environments whenever you can. The There are number of factors involved in a successful camera installation. TV‐IP314PI is an IP66 grade water proof camera, and it will work in Follow the suggested installation steps and go through the check lists. This moist environments. However, rain may affect the picture quality, ...
Page 11
If you have already setup the password and want to keep the password unchanged, un‐check the Change Password box and click next to get the link to access your camera.) 10. Scan the QR code to find and install the TRENDnet IPView app. Click Finish to exit the program or click Home to return to the main screen. ...
TRENDnet User’s Guide TV‐IP314PI Mount your camera Hardware Installation Drill the screw holes and the cable hole if necessary with the drill template Cabling comes with the package. It’s recommended that the wiring the cable in your home or office by a professional. If you already have the cable deployed, make sure the cable and the connectors meet the category 5 Ethernet cable standards. At least 2 pairs of twisted lines are required for power and data. Poor cable quality may cause unexpected problems. Testing your cable or running a new cable is suggested for new camera installation. Waterproof cap The TV‐IP314PI itself is IP66 grade water and dust proof. There is a set of ...
IP address you setup through the setup CD or 192.168.10.30. the package and use accompanying TRENDnetVIEW Pro software (version (If you have a DHCP server on your network, the IP address will be 2.4.3 or later) for Windows computers. The software is included on the CD assigned dynamically. For example, if you have a home gateway on your comes with the package. If you do not have the CD with you, you can go to network and you plug‐in the camera on the same network, you can find http://www.TRENDnet.com/support enter the model number “TV‐IP314PI” the camera’s IP address on your home gateway.), and then press Enter. and download the software. If you didn’t go through the TV‐IP314PI CD installation wizard or you have reset the TV‐IP314PI to factory defaults by pressing and holding reset button while power on the camera and keep holding the button for over 10 seconds, your TV‐ IP314PI has following settings: System Default ...
Page 15
TRENDnet User’s Guide TV‐IP314PI 3. The camera management page will detect if you installed the camera 5. Permission request may show up depends on the Internet security video streaming plug‐in or not. Click the link to download the plug‐in from settings on your computer. Click More Info and then Run anyway to ...
TRENDnet User’s Guide TV‐IP314PI 7. Refresh the browser and the Live View page will show up and begin Logging‐in to the Camera for the First Time (OS X) streaming video. 1. Open the web browser on your computer. In the address bar, enter the IP address of the camera 192.168.10.30. (If you have a DHCP server on your network, the IP address will be assigned dynamically. For example, if you have a home gateway on your network and you plug‐in the camera on the same network, then you can find the camera IP address on your home gateway), and then press Enter. 2. Enter the user name, admin, and the default password, admin, and then click OK. ...
Page 17
TRENDnet User’s Guide TV‐IP314PI 3. The camera management page will detect if you installed the camera 5. Go to the Finder and navigate to the Download folder. Command‐Click webcomponent plug‐in or not. Click the link to download the plug‐in from the WebComponents.pkg and then click Open. (If you are install the plug‐ the TV‐IP314PI camera. in from the CD when you don’t have internet connection, just browse to /Mac folder and double click the WebComponents.pkg file.) Note: Internet connection is required to download the plug‐in. If you do not have Internet access, you can find the plug‐in on the CD comes with the package under /Mac folder. 6. Click Open with Installer to start installation. 4. Quit your browser completely by command‐Click on the browser icon ...
TRENDnet User’s Guide TV‐IP314PI Live View After you log‐in into the camera management page, you’ll see the Live View page. Snapshot Click this icon to take a video snapshot. Zoom Click once to enable zoom. When enabled, click and drag the area on the picture to zoom in. Right click to resume 100% zoom. Click the icon again to disable zoom. The zoom function works in full screen mode as ...
TRENDnet User’s Guide TV‐IP314PI Playback Time Line There is a play back head in the center of the time line represented in a yellow You can playback the video recording on the network storage and download vertical line. To look for a specific video recording, move the time line by the video clip and snapshots to your local computer. clicking and dragging it. If the recording is short, zoom in by clicking button. Click to zoom out the time scale. If you know the exact time of ...
TRENDnet User’s Guide TV‐IP314PI Playback Slice images from video playback Use playback controls to play back the video recording. You can take snapshots from playback video or make new video clips from the video you are playing back. Click this button to play the video. Click this button to enable zoom. Then click and drag on Click this button to pause video playback. the video to define the area you want to zoom in. Click Click this button to stop playback. again to get back to 100% zoom. Click this button increase playback speed*. Double click to show video in full screen and press ESC Click this button decrease playback speed*. on keyboard to exit full screen mode. Click to playback video frame by frame. Click again for Click this button to disable zoom. ...
TRENDnet User’s Guide TV‐IP314PI Download sections of video Download snapshots To save complete video sections or snapshots, you can download the files directly. Click button to list snapshots to download Click button to download video sections. Check the time of the recording, select the videos you want to download, and Select the type of event that triggered the snapshots. then click Download. Choose the Start Time and End Time. Then, click Search ...
TRENDnet User’s Guide TV‐IP314PI System Configuration Authentication RTSP: TV‐IP314PI’s video stream can be accessed with RTSP, Real Time Streaming Protocol. Only the Device Settings administrator and users can view this video stream Un‐checking this box will allow everyone access to this video Setup your camera name and location for easy identification. This camera stream without authentication. Default: Checked. name will also be recognized by other network camera software as the name of this camera. OSD, On Screen Display, camera name is referring to this setting as well. Service ...
TRENDnet User’s Guide TV‐IP314PI User Accounts Time Settings You can setup up to 16 user accounts to access the camera’s video stream The accuracy of the system clock is important for scheduling and accurate with a web browser or real time video stream (RTSP). Only one administrator logging. You can synchronize the system time with your computer, or account can be setup to configure the TV‐IP314PI and cannot be deleted. automatically check the time accuracy with a network time server (NTP ...
TRENDnet User’s Guide TV‐IP314PI Daylight Savings Live View Settings Setup daylight savings. Setup the live view video quality, file size and file saving directories. Automatic Update Enable DST: Check this box if your time zone has daylight savings. Start Time: Enter the date that daylight savings starts End Time: Enter the date that daylight savings ends DST Bias Enter how much time the daylight saving adjusted by daylight savings. Live View Parameters Click Save to save the changes Live View Configure the buffer size for live view video stream. With Buffer: low buffer size setting, you can get real‐time video ...
TRENDnet User’s Guide TV‐IP314PI Maintenance Record File Settings Record file size: This size of live view video recording. You can choose 256MB, 512MB, or 1GB a file. Smaller file size is good You can restart, load camera settings and upgrade the camera firmware on for many short recordings. this page. Save record Click Browse and then choose a new destination if you files to: want to save the file somewhere else. Save Click Browse and then choose a new destination if you downloaded want to save the file somewhere else. files to: Picture and Clip Settings Save snapshots Click Browse and then choose a new destination if you in want to save the file somewhere else. live view to: Save snapshots Click Browse and then choose a new destination if you when playback want to save the file somewhere else. to: Save clips to: Click Browse and then choose a new destination if you want to save the file somewhere else. Click Save to save the changes ...
Upgrade. Status: Shows the status in firmware upgrade. TRENDnet may periodically release firmware upgrades that might add features or fix problems associated with your camera. To find out if there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.com/downloads/ 1. If a firmware upgrade is available, download the firmware to your computer. 2. Unzip the file to a folder on your computer. ...
TRENDnet User’s Guide TV‐IP314PI Port Network Interface MAC Address: Click this button to reboot this camera. You can change the service port numbers of TV‐IP314PI and enable/disable Duplex and Choose one of the Ethernet duplex and speed to RTSP or HTTPS services. Speed: match your network. Default: auto. MTU: Maximum transmission unit. The maximum field size in the Ethernet packet. Primary DNS: Enter your first IPv4 or IPv6 DNS server address Secondary DNS: Enter your second IPv4 or IPv6 DNS server address IPv4 DHCP: Check this box if the IP address is assigned by DHCP server. Port Numbers IPv4 Address: The IPv4 dynamic or static address HTTP Port: The default web access port. You can change the port Subnet Mask: Network range of the subnet ...
TRENDnet User’s Guide TV‐IP314PI DDNS PPPoE Dynamic Domain Name Service, DDNS, allows you to find your camera from Setup PPPoE (ADSL) connection to connect your camera with your ISP, the Internet with an easy to remember domain name. Internet Service Provider. DDNS PPPoE (ADSL) Enable DDNS: Check this box to enable DDNS Service. Enable PPPoE: Check this box to enable PPPoE connection. DDNS Type: Select a DDNS service provider. Dynamic IP: The IP address assigned by ISP User Name: Enter the account name. Password: Enter the password. Confirm: Enter the password again. Server Address: Enter the DDNS server address. ...
TRENDnet User’s Guide TV‐IP314PI SNMP SNMP V1/V2 Enable SNMPv1: Check this box to enable SNMP v1 management. SNMP Settings allows you to assign the contact details, location, community Enable SNMPv2c: Check this box to enable SNMP v2c management. name and trap settings of SNMP. This is a networking management protocol Read SNMP Specify the password to access the SNMP Community: community for read only access. used to monitor network‐attached devices. SNMP allows messages (called Write SNMP Specify the password for access to the SNMP protocol data units) to be sent to various parts of a network. Upon receiving Community: community with read/write access. these messages, SNMP compatible devices (called agents) return data stored Trap Address: Specify the IP address for the SNMP trap in their Management Information Bases. community. Trap Port: Specify the port number for the SNMP trap community. Trap Community: Specify the name of SNMP trap community. ...
Page 35
TRENDnet User’s Guide TV‐IP314PI 802.1X Setup 802.1X for remote authentication service. Authentication Choose the authentication method to verify the Algorithm: source of information: MD5 or SHA. Authentication Specify the authentication password between 8 to 32 Password: letters. Private‐key Choose the privacy key to encrypt SNMP messages: Algorithm: DES or AES. Private‐key Specify the privacy key between 8 to 32 letters. Password: SNMP Other Settings SNMP Port: SNMP service port number. Click Save to save the changes 802.1X Authentication Enable IEEE Check this box to enable 802.1X authentication ...
TRENDnet User’s Guide TV‐IP314PI IP Address Filter Quality of Service (QoS) Set up a list of clients allow only the clients on the list to access this camera Setup traffic prioritization tags the video packets to go through network or to reject clients on the list from access this camera. switches and routers with assigned priority. You can set the Differentiated Services Code Point (DSCP) bits on outgoing data streams. The QoS capable network device will forward different data in different priorities. The meaning of the value is different in different DiffServ domains. Consult your network manager for the setup details. IP Address Filter Enable IP Check this box to enable IP address filtering service. Address Filter: IP Address Filter Choose Forbidden to ban the listed IP addresses or Type: Allowed to allow listed host to access this camera. Add: Click Add to add a user account Modify: To modify an entry on the list, highlight the entry by IP Address Filter clicking on it. Then, click the Modify button. ...
TRENDnet User’s Guide TV‐IP314PI UPnP Video Settings Universal Plug‐and‐Play is a device discovery protocol set. It allows your Video Format camera to easily be found, for example, on a Windows operation system. UPnP Enable UPnP: Check this box to enable UPnP connection. Friendly Name: The name that will be appeared when searched. Port Mapping Enable Port Check this box to enable UPnP connection. Mapping: Port Mapping Choose Manual or Auto port mapping. Mode: External Port: Choose the port number for mapping. Click Save to save the changes ...
TRENDnet User’s Guide TV‐IP314PI Display Settings Resolution: H.264 MJPEG Adjust video image quality, lightness, and color settings here. Bitrate Type: Choose between variable bit rate or constant bit rate for video compression. The default is variable rate. Video Quality: Choose the video quality. The default is medium quality. Frame Rate: Choose the capturing frame rate. The default value is 30 frames per second. Reduce the frame rate to reduce the capture file size. Max. Bitrate: Choose the maximum video sampling bit rate. Default: 2048 I Frame Interval An I Frame is a frame that records a complete picture. Frames between I frames, (P frame or B frame) only records the image differences between two frames. Choose the I Frame Interval here. The default is 60. Click Save to save the changes Sub stream can be used for lower resolution needed situation, for example mobile app streaming or NVR streaming. Brightness: Use the slider or enter a number (0‐100) to adjust the image brightness. Default: 50 Contrast: Use the slider or enter a number (0‐100) to adjust the ...
Page 39
TRENDnet User’s Guide TV‐IP314PI Light sensitivities Smart IR: Smart IR can adjust the strength of infrared lights at night depending on the distance of an object to maintain the maximum IR light distance and while maintaining a clear picture when object is close by. Default: On. Max. Exposure Adjust this value for exposure time for Time: each picture. You can choose a value between 1/3 second to 1/100,000 second. The default value is 1/30 second exposure time for each picture. Video Standard: This is the base frequency for the video refresh rate. It is recommended to set to the same frequency of your local video standard (NTSC: 60, PAL: 50). Default: 60Hz. Day/Night Choose whether you want the Switch: camera to be set to the day mode (color video) or night mode (IR enhanced black/white video). You can manually set it to day mode or night mode, adjust by lighting (Auto), or pre‐define schedule. Auto: Sensitivity: The light sensor sensitivity. Switch Time: The time delayed to switch between modes. Longer switch time can prevent unnecessary mode flipping if an object is blocking the light source ...
Page 40
TRENDnet User’s Guide TV‐IP314PI Schedule: Image adjustments Use quick selection or enter the time down below. Back Light Back light compensation: Setup a fixed light source Click OK to confirm the time you want to set. Compensation position to compensate and adjust the image in the dark. Wide‐Dynamic‐ Choose the area that you want to enhance (dark area, Range: not light source). Note: By default, the WDR is disabled. Please enable WDR to set up back light compensation. Start Time: The start time for day mode. Stop Time: The start time for day mode. WDR: Wide Dynamic Range compensates for the dark ...
TRENDnet User’s Guide TV‐IP314PI On Screen Display Settings Text Overlay Display the camera name and the time the video is shooting on the screen Display extra information on the screen over the image. Display Check this box to display the product name that was Name: setup in the device settings Display Date: Check this box to display system time. Display Week: Check this box to display time of the week. Check Box: Check this box to enable text overlay. Time Format: Select 12 or 24‐hour time format. Text Field: Enter the text you want to display. You can enter your Date Format: Select the date format local language if you want. The text field allows maximum 44 English letters or 20 non‐English ...
TRENDnet User’s Guide TV‐IP314PI Privacy Mask Video Recording Create a masking area to keep your privacy. You can create up to four independent masking areas by clicking and dragging on the screen. Pre‐record: Recording time before trigger event. Post‐record: Recording time after trigger event. Overwrite: Select Yes to allow older recordings to be Enable Privacy Mask: Check this box to enable privacy masking. overwritten. Stop Drawing: Click this button to stop drawing. Enable Record Check this box and then click Save to enable video Schedule: recording. Clear All: Click this button to clear all the masking areas.
Page 44
TRENDnet User’s Guide TV‐IP314PI Draw Area: Click Draw Area button to start drawing. Click and drag on the area you want to set up the motion detection. You can draw up to 8 different areas. Click Stop Drawing to stop drawing motion detection areas. The red grids represent the motion detection area. Sensitivity: Move the slider to adjust detection sensitivity. Clear All: Click this button to clear all the set up areas. ...
Page 46
TRENDnet User’s Guide TV‐IP314PI Arming Schedule Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. 1. Select day of the week you want to edit. 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. Enable Check this box to enable tamper detection. Click Save 4. Click Select All or the weekday you want to Tamper to save the settings. have the same schedule on different day. Detection: 5. Click another day of the week by clicking on Draw Area: Click Draw Area button to start drawing. Click and drag its tab to set the next schedule. Click OK on the area you want to set up the tamper detection. ...
TRENDnet User’s Guide TV‐IP314PI Notification Snapshot You can set up your camera to continuously taking snapshots or taking Provide notifications for other system events, set up your notifications here. snapshots only when events happening. Notification Notification First, choose the exception type, and then choose Type: the corresponding action. Send Email: Check this box to send an e‐mail notification when Continuous motion is detected. Enable: Check this box to take snapshots continuously. Click Save to save the changes Format: Save snapshots in JPEG format Resolution: Uses the same resolution set in Video Format for the ...
TRENDnet User’s Guide TV‐IP314PI Email Event triggered Enable: Check this box to take snapshots when an event is occurred. Set up email accounts for notifications. Format: Save snapshots in JPEG format Resolution: Uses the same resolution set in Video Format for the snapshot resolution. Quality: Choose a compression quality for snapshot. Interval: State the time interval between this series of snapshots. The default interval is 1 second. Capture State how many snapshots you want to take in a single Number: triggered event. Default: 3 pictures. Click Save to save the changes ...
TRENDnet User’s Guide TV‐IP314PI Enable SSL: Check this box if your service provider requires a SSL Network Storage secured connection. Attach Check Attach Image if you want to send a snapshot Network Storage Image/Interval: image with the email notification and select the interval of snapshots in seconds. Network Storage must be setup before it can be managed. For storage Authentication: Check this box if your server requires a password in order to send email. Most email servers require ...
Page 50
TRENDnet User’s Guide TV‐IP314PI Password: Enter the password to access the network storage. Enter any non‐blank letters if no authentication is required. Click Save to save the changes. The camera may reboot to make the network storage available. Go to the next section to format and manage your network storage. Tip: To create a network storage on your Windows® based system, create a No: The sequential number of the network storage. shared folder and then test your set up with another computer. Enter the IP Type: The type of storage. address of the computer here and enter the shared folder name with a Server Enter the IP address of your network storage. leading forward slash. For example, if you have a shared folder named “SMB”, Address: enter “/SMB” in the File Path. File Path: Enter the shared folder as file path for network storage. You can create a folder under the shared folder and make it a ...
TRENDnet User’s Guide TV‐IP314PI Storage Management Format: Select a network storage volume and then click Format to format your network storage. This action will format the network volume (shared folder) for video recording. Network Storage must be setup before it can be managed. To setup storage, Placeholder files (formatting files) will be created to make ...
TRENDnet User’s Guide TV‐IP314PI FTP Server Enable Snapshot Check this box if you want to store snapshots on the to FTP: FTP. Server Address: Enter the FTP server IP address. Port: Enter the service port number of the FTP server. User Check Anonymous if the FTP server does not require Name/Anonymous authentication. Enter the User Name if the FTP server requires authentication. Password: Enter the password of the FTP account. Confirm: Enter the password again to make sure the password was entered correctly. Directory When saving snapshots on an FTP server, they can Structure: be saved in a single place or organized with meaningful directory names. Save in root directory: You can choose to store all files in the same folder of FTP login. Save in directory: Structure your folders with camera name or IP address. Directory: Use Camera Name: Use the camera name to organize the saved files. Use Camera IP: Use the camera IP address to ...
TRENDnet User’s Guide TV‐IP314PI FCC Caution: Any changes or modifications not expressly approved by the Appendix party responsible for compliance could void the user’s authority to operate this equipment. Direct video access ‐ RTSP This device complies with Part 15 of the FCC Rules. Operation is subject to the To access the video directly through RTSP, just visit the camera IP address on following two conditions: (1) This device may not cause harmful interference, port 554 by default. For example: 192.168.10.30:554 use the admin or user and (2) this device must accept any interference received, including password the login. interference that may cause undesired operation. Regulations Federal Communication Commission Interference Statement IMPORTANT NOTE: This equipment has been tested and found to comply with the limits for a ...
TRENDnet User’s Guide TV‐IP314PI Europe – EU Declaration of Conformity ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2004/108/EK, 2006/95/ΕΚ και. Français [French] Par la présente TRENDnet déclare que l'appareil TV‐IP314PI est This device complies with the essential requirements of the Directive conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2004/108/CE, 2006/95/CE et. 2004/108/EC and 2006/95/EC. The following test methods have been applied Italiano[Italian] Con la presente TRENDnet dichiara che questo TV‐IP314PI è in order to prove presumption of conformity with the essential requirements conforme ai requisiti essenziali ed alle altre disposizioni of the Directive 2004/108/EC and 2006/95/EC: pertinenti stabilite dalla direttiva 2004/108/CE e 2006/95/CE. Latviski [Latvian] AršoTRENDnetdeklarē, ka TV‐IP314PI atbilstDirektīvas Safety:EN60950‐1:2006+A11:2009+A1:2010+A12:2011+A2:2013 2004/108/EK un 2006/95/EK būtiskajāmprasībām un citiemar EMC: EN 55022:2010 CLASS B to saistītajiemnoteikumiem. EN50130‐4:2011 Lietuvių Šiuo TRENDnet deklaruoja, kad šis TV‐IP314PI atitinka esminius EN 61000‐3‐2:2014 ...
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO products that are replaced become the property of TRENDnet. Replacement products EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN may be new or reconditioned. TRENDnet does not issue refunds or credit. Please CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, contact the point‐of purchase for their return policies. INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE TRENDnet shall not be responsible for any software, firmware, information, or ...