Table of Contents
Advertisement
TRENDnet User's Guide
Installation Procedure
There are number of factors involved in a successful camera installation.
Follow the suggested installation steps and go through the check lists.
This guide will help you make your camera installation smoothly and
easily.
• Plan for installation location, see page 9 (next paragraph)
• Setup Your Camera with CD, see page 10
• Hardware Installation, see page 14
Plan for installation location
Viewing angle
The TV-IP321PI is a dome camera with a focused viewing angle (70
horizontal) that provides non-distorted and detailed images. Choose the
location where has good angle to shoot the image you expect to see. The
motion detection area should also be considered when installing the
camera.
Weather Conditions
The TV-IP321PI is a small dome camera, which fits most installations
indoor and outdoor. The camera can work under a wide range of
weather conditions. For severe weather conditions, a camera housing
with temperature and moisture control is recommended. Using the
camera in milder weather conditions will help extend the camera's
product life and preserve the quality of the video image.
© Copyright 2015 TRENDnet. All Rights Reserved.
• Moisture: Avoid damp or moist environments whenever you can.
The TV-IP321PI is an IP66 grade water proof camera, and it will
work in moist environments. However, rain may affect the picture
quality, especially at night, water may reflect the light from the
infra-red illumination and degrade picture quality. Install your
camera in dry weather when possible and sealing well when you
screw on the cap.
• Temperature: TV-IP321PI works within a specified temperature
range. Areas with severe temperatures should be avoided when
installing the camera. It's recommended that you use an enclosure
with a heater and blower if you plan on using this camera outside
of the specified temperature range.
• Sunlight: Avoid direct sun light exposure. Direct sun light will
damage the image sensor. If sunlight is necessary for your viewing
purposes, provide protection for the image sensor.
• Lighting: Consider installing your camera faces the same direction
of the light sources. Shooting images with top-down position
outdoor or next to the existing light source are good choices. Avoid
the light source if it creates a shade that darkens the viewing area.
TV-IP321PI
9
Hide quick links:
Advertisement
Table of Contents
