Table of Contents
Advertisement
TRENDnet User's Guide
Setup Camera with CD
1. Insert the Installation CD-ROM into your computer's CD-ROM drive to initiate the
Auto-Run program. Click the Install Camera.
2. Write down the MAC ID of the camera. Click Next.
© Copyright 2015 TRENDnet. All Rights Reserved.
3.
Connect a network cable to the camera's network port to a PoE switch. The power LED
will be lit. Allow 60 seconds for the camera to boot up. Click Next.
4.
Wait while searching the cameras.
TV-IP312PI
5
Advertisement
Table of Contents
