Table of Contents
Advertisement
TRENDnet User's Guide
SNMP
SNMP Settings allows you to assign the contact details, location, community name and trap
settings for SNMP. This is a networking management protocol used to monitor network-
attached devices. SNMP allows messages (called protocol data units) to be sent to various
parts of a network. Upon receiving these messages, SNMP compatible devices (called
agents) return data stored in their Management Information Bases.
© Copyright 2015 TRENDnet. All Rights Reserved.
SNMP V1/V2
Enable SNMPv1:
Check this box to enable SNMP v1 management.
Enable SNMPv2c:
Check this box to enable SNMP v2c management.
Read SNMP Community:
Specify the password for access the SNMP community
for read only access
Write SNMP Community:
Specify the password for access to the SNMP
community with read/write access
Trap Address:
Specify the IP address for the SNMP trap community
Trap Port:
Specify the port number for the SNMP trap community
Trap Community:
Specify the name of SNMP trap community
SNMP V3
Enable SNMPv3:
Check this box to enable SNMP v3 management.
Read User Name:
SNMP v3 member user name
Security Level:
Choose one of the security levels.
Authentication Algorithm:
Choose the authentication method to verify the source
of information: MD5 or SHA.
Authentication Password:
Specify the authentication password between 8 to 32
letters.
Private-key Algorithm:
Choose the privacy key to encrypt SNMP messages:
DES or AES.
Private-key Password:
Specify the privacy key between 8 to 32 letters.
Write User Name:
SNMP v3 manager user name
Security Level:
Choose one of the security levels.
Authentication Algorithm:
Choose the authentication method to verify the source
of information: MD5 or SHA.
Authentication Password:
Specify the authentication password between 8 to 32
letters.
Private-key Algorithm:
Choose the privacy key to encrypt SNMP messages:
DES or AES.
TV-IP312PI
23
Advertisement
Table of Contents
