Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TRENDnet TV-IP312PI
Summary of Contents for TRENDnet TV-IP312PI
-
Page 2: Table Of Contents
IPv6 ...................... 4 Time Line .................... 20 Advanced Playback ................. 5 Playback .................... 21 D‐WDR ..................... 5 Slice images from video playback ............ 21 Storage .................... 5 Download sections of video .............. 22 Free Apps .................... 5 Download snapshots ................ 22 Complimentary Software ................ 5 Log ...................... 23 Package Contents .................. 5 Search for logs .................. 23 Camera Overview .................. 6 System Information ................... 24 Warnings ..................... 6 System Configuration .................. 26 Cautions ...................... 7 © Copyright 2017 TRENDnet. All Rights Reserved. 2 ... - Page 3 Federal Communication Commission Interference Statement .... 52 PPPoE ...................... 33 RoHS ...................... 52 SNMP ...................... 33 Europe – EU Declaration of Conformity ............ 53 802.1X ....................... 35 Limited Warranty .................. 54 IP Address Filter .................. 35 Quality of Service (QoS) ................ 36 UPnP ...................... 36 Video Settings .................... 37 Video Format .................... 37 Display Settings .................. 38 On Screen Display Settings................ 40 Text Overlay .................... 41 Privacy Mask ..................... 41 Video Recording .................. 42 Events ...................... 43 Motion Detection .................. 43 © Copyright 2017 TRENDnet. All Rights Reserved. 3 ...
-
Page 4: Product Overview
PoE Save installation costs with Power over Ethernet (PoE) Power Port Optional power port for non‐PoE installation Outdoor Ready Outdoor IP66 weather rated Sun Visor Sun visor increases image quality throughout the day TV‐IP312PI Performance 3 Megapixel Record 2048 x 1538 pixel video at 15 fps in H.264 compression Features Night Vision TRENDnet’s Outdoor 3 MP Full HD 1080p PoE IR Network Camera, model Night vision up to 30 meters (100 ft.) in complete darkness TV‐IP312PI, offers night vision up to 50 meters (164 ft.), an IP66 weather Smart IR rating, and an integrated mounting bracket. Ultra energy efficient advanced infrared creates a more balanced night vision illumination field and reduces Dynamic IR adjustment optimizes night visibility close object overexposure. Record 3 Megapixel HD video (2048 x 1536) at Digital Zoom 20 fps in a space saving H.264 compression format. Manage up to 32 Digitally zoom anywhere within the viewing field TRENDnet cameras with included complimentary software and mobile apps. IPv6 IPv6 support © Copyright 2017 TRENDnet. All Rights Reserved. 4 ... -
Page 5: Advanced Playback
TV‐IP312PI Digital Wide Dynamic Range improves video quality in high contrast lighting Quick Installation Guide environments CD‐ROM (Utility, Software & User's guide) Storage Camera Mounting hardware Samba video support with notification if storage drive is full (Drill template, mounting screws, waterproof cap, torx screw driver) Free Apps (Optional power adapter not included) See live video on a mobile device with free Apple® and Android™ apps Complimentary Software Complimentary pro‐grade software to manage up to 32 TRENDnet cameras Drilling Template Mounting Screws Network Cable Torx Screw Driver Waterproof Accessories If any package content is missing or damaged, please contact the retail store, online retailer, or reseller/distributor from which the product was purchased. © Copyright 2017 TRENDnet. All Rights Reserved. 5 ... -
Page 6: Camera Overview
(12VDC1A sold local codes. separately) to camera. Ethernet/PoE Plug the network cable to connect to supply power to the Port camera if using non‐PoE connection. Mounting Adjust the screws to fit the mounting position Hardware IP66 Housing Housing is rated with IP66. IR Sensor Detect the light source. IR LEDs The IR LEDs will be on when the sensor detect low light source. Adjustable Sun Adjustable sun visor to prevent direct sun to the camera. Visor © Copyright 2017 TRENDnet. All Rights Reserved. 6 ... -
Page 7: Cautions
• Do not place the camera in extremely hot, cold temperatures (the operating temperature should be between ‐10°C to 60°C), dusty or damp environment, and do not expose it to high electromagnetic radiation. • To avoid heat accumulation, good ventilation is required for a proper operating environment. • Keep out of water and any liquid. • While shipping, the camera should be packed in its original packing. © Copyright 2017 TRENDnet. All Rights Reserved. 7 ... -
Page 8: Weather Conditions
blower if you plan on using this camera outside of the specified temperature range. • Sunlight: Avoid direct sun light exposure. Direct sun light will damage the image sensor. If sunlight is necessary for your viewing purposes, provide protection for the image sensor. • Lighting: Consider installing your camera faces the same direction of the light sources. Shooting images with top‐down position outdoor or next to the existing light source are good choices. Avoid the light source if it creates a shade that darkens the viewing area. © Copyright 2017 TRENDnet. All Rights Reserved. 8 ... -
Page 9: Mount Your Camera
TV‐IP312PI Mount your camera 8. Align the mounting bracket with the screw anchors, and then use the provided screws to secure the camera to the mounting surface. 1. Loosen the locking bolts and manually position the camera as desired. 9. Power up the camera by connecting the other end of the cable to a PoE 2. Place the provided drill template on the wall or ceiling. switch or injector on your network. 10. Loosen the screws and rotate the collar to final angle, then the screws. 3. Drill holes for the provided screw anchors at each marked position on the template. Make sure the drill bit matches the size of the provided screw anchors. 4. If the camera wire will be installed through the based plate of the unit, skip to step 6. If the wiring will be routed though the wall, drill a hole for the cable. 5. Pass the camera’s cables through the hole. 6. Connect the network cable to the camera. 7. Insert the provided screw anchors into the pilot holes. © Copyright 2017 TRENDnet. All Rights Reserved. 9 ... -
Page 10: Setup Your Camera With Cd
TRENDnet User’s Guide TV‐IP312PI Setup Your Camera with CD 3. Last, click Next to finish the installation. 1. Insert the Installation CD‐ROM into your computer’s CD‐ROM drive to initiate the Auto‐Run program. Choose your preferred language and then click the Install Camera Utility. 4. This will also require you to Install WinPcap program if you don’t have this installed before, please follow the on screen Instructions to Install It. 2. Install the Camera Utility as instructed © Copyright 2017 TRENDnet. All Rights Reserved. 10 ... - Page 11 TRENDnet User’s Guide TV‐IP312PI 5. Restart the computer after the Installation. 7. Find the camera you would like to access and configure then double click on the IP address. 6. After the computer has restarted, double click on the Camera Utility icon to launch the program. 8. Continue to the next section Access your Camera with the Web Browser for detail configurations of the camera. © Copyright 2017 TRENDnet. All Rights Reserved. 11 ...
-
Page 12: Access Your Camera With The Web Browser
Logging‐in to the Camera for the First Time (Windows) 1. Find the camera from the Utility and double click on the IP address to open the browser. 3. The camera management page will detect if you installed the camera video streaming plug‐in or not. Click the link to download the plug‐in from the camera. © Copyright 2017 TRENDnet. All Rights Reserved. 12 ... - Page 13 Launch the plug‐in installation to install the plug‐in. 5. Permission request may show up depends on the Internet security settings on your computer. Click Yes to install the plug‐ in. 7. Click Finish to finish the installation. © Copyright 2017 TRENDnet. All Rights Reserved. 13 ...
-
Page 14: Logging-In To The Camera For The First Time (Os X)
IP address of the camera 192.168.10.30. If the camera is connected to a router/network, please use the Windows Camera Utility to find the exact IP address. 2. Activate the admin User Account by entering your desired password, and 9. Refresh the browser and the Live View page will show up and begin then click OK. streaming video. © Copyright 2017 TRENDnet. All Rights Reserved. 14 ... - Page 15 Note: Internet connection is required to download the plug‐in. If you do not have Internet access, you can find the plug‐in on the CD comes with the package under /Mac folder. 5. Go to the Finder and navigate to the Download folder. Command‐Click the WebComponents.pkg and then click Open. (If you are install the plug‐ in from the CD, just browse to /Mac folder and double click the WebComponents.pkg file.) © Copyright 2017 TRENDnet. All Rights Reserved. 15 ...
- Page 16 TRENDnet User’s Guide TV‐IP312PI 6. Click Open to start installation. 8. Select a destination to install the plug‐in. Then click Continue. 7. Click Continue to install the plug‐in. 9. Use the default location and click Install. © Copyright 2017 TRENDnet. All Rights Reserved. 16 ...
- Page 17 TRENDnet User’s Guide TV‐IP312PI 10. Enter your password and click Install Software 12. Click Close to exit the installation. 13. Open the browser and login again with the default IP 192.168.10.30 or the IP that was dynamically assigned by your router. 11. Installation will process automatically. 14. Enter your user name and password, then click Login © Copyright 2017 TRENDnet. All Rights Reserved. 17 ...
- Page 18 TRENDnet User’s Guide TV‐IP312PI 15. Click Trust (You’ll have to do this again when your camera changes to a new IP address.) 16. The Live View page shows up and the video starts to stream. © Copyright 2017 TRENDnet. All Rights Reserved. 18 ...
-
Page 19: Live View
TV‐IP312PI has two video streams: Click the picture to view in full screen Videos and snapshots captured from The status bar shows the status you H.264 and MJPEG. Switch to view the mode. Double click again or press Live View will save to your computer. are at, including enabled the zoom, different video streams by clicking this escape key on your keyboard to exit See Live View Settings on page 29 for recording video, and successfully icon. full screen mode. details. taking a snapshot. © Copyright 2017 TRENDnet. All Rights Reserved. 19 ... -
Page 20: Playback
then enter the time you want to playback. Different types of recordings are identified differently. The scheduled recordings are marked in blue, and the recordings triggered by motion detection are marked in red. Search for video recordings Click the date selection, and then choose a date as the date range of searching. Click and drag the time line to move your time manually. Click Search to start searching. Click this button to zoom in the scale Click this button to zoom out of the scale Click this button to specify a specific time of the day. © Copyright 2017 TRENDnet. All Rights Reserved. 20 ... -
Page 21: Playback
the video to define the area you want to zoom in. Click Click this button increase playback speed*. again to get back to 100% zoom. Click this button decrease playback speed*. Double click to show video in full screen and press ESC Click to playback video frame by frame. Click again for on keyboard to exit full screen mode. the next frame� Click this button to disable zoom. * Note: There are 5 steps of playback speed you can choose from: 1/4, 1/2, 1, 2, and 4 times of original speed. Click this button to take a snapshot of current playback. Click this button to start clipping a video from playback. Click this button to stop clipping a video from playback. Where can I find saved files? © Copyright 2017 TRENDnet. All Rights Reserved. 21 ... -
Page 22: Download Sections Of Video
To save complete video sections or snapshots, you can download the files directly. Click button to list snapshots to download Click button to download video sections. Select the type of event that triggered the snapshots. Check the time of the recording, select the videos you want to download, and Choose the Start Time and End Time. Then, click Search then click Download. to find the snapshot list. Check the time of the snapshot, © Copyright 2017 TRENDnet. All Rights Reserved. 22 ... -
Page 23: Log
Where can I find saved files? Videos and snapshots captured from Playback will be saved to your computer See Live View Settings on page 29 for details. Log The log of the TV‐IP312PI will be saved on the network storage. You can search the relevant records and save to your local computer. (See Network Storage on page 48 to setup the storage.) Search for logs Click the type of log and then the Start Time and End Time. Click Search to start searching. © Copyright 2017 TRENDnet. All Rights Reserved. 23 ... -
Page 24: System Information
System Information page shows the TV‐IP312PI’s basic information. Click Save Log to save the logs to your computer. System then click System Info to show the page. Where can I find saved files? Videos and snapshots captured from Playback will be saved to your computer See Live View Settings on page 29 for details. Basic Information Device Name: Human readable device name for easy identification. Firmware Version: Firmware version MAC Address: The MAC address of Ethernet Interface System Time: The system time setup in the camera. Keeping this time correct is important for recording, scheduled control and logging accurately. Network Information IP Address: IP address of the TV‐IP312PI Subnet Mask: Network range of IP address © Copyright 2017 TRENDnet. All Rights Reserved. 24 ... - Page 25 TRENDnet User’s Guide TV‐IP312PI Default Gateway: The default route going from the TV‐IP312PI subnet. Primary DNS: Primary DNS server address Secondary DNS: Secondary DNS server address © Copyright 2017 TRENDnet. All Rights Reserved. 25 ...
-
Page 26: System Configuration
OSD, On Screen Display, camera name is referring to this Authentication setting as well. RTSP: TV‐IP312PI’s video stream can be accessed with RTSP, Real Time Streaming Protocol. Only the administrator and users can view this video stream Un‐checking this box will allow everyone access to this video stream without authentication. Default: Checked. HTTP: TV‐IP312PI can be accessed via password protected web management interface. Un‐checking this box will allow anyone to access this camera and change its settings. Service Enable TV‐IP312PI embedded SSH service for multiple camera SSH: control for system developer. Default: disabled. © Copyright 2017 TRENDnet. All Rights Reserved. 26 ... -
Page 27: User Accounts
(NTP server). User Accounts Add: Click Add button to add one user account Modify: To change a user’s name and password, highlight the user by clicking on it. Then, click Modify button. You can change the user’s name and password. You can also change the administrator’s password here. But, the administrator’s name is fixed, you cannot change that. Automatic Update NTP Specify a time server (NTP server) to synchronize with. Server: (e.g. pool.ntp.org) Interval: The time interval that the TV‐IP312PI will synchronize the time with NTP server. Default: 1440 minutes (24 hours) Click Save to save the changes Click OK to save the changes. © Copyright 2017 TRENDnet. All Rights Reserved. 27 ... -
Page 28: Daylight Savings
End Time: Enter the date that daylight savings ends Set Time: Click the calendar icon and manually select the date. DST Bias Enter how much time the daylight saving adjusted by Check the Sync. with computer time to copy the time daylight savings. from your computer. Click Save to save the changes Click Save to save the changes © Copyright 2017 TRENDnet. All Rights Reserved. 28 ... -
Page 29: Live View Settings
By default, files will be saved under the folder with downloaded your user name, under the subdirectory files to: TRENDnet/DownloadFiles. Click Browse and then choose a new destination if you want to save the file somewhere else. Picture and Clip Settings Save snapshots By default, files will be saved under the folder with your user ... -
Page 30: Maintenance
Remote Upgrade Firmware: Click Browse to find the latest firmware and then click Upgrade. Status: Shows the status in firmware upgrade. TRENDnet may periodically release firmware upgrades that might add features or fix problems associated with your TRENDnet model and version. To find out if there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.com/downloads/ 1. If a firmware upgrade is available, download the firmware to your ... -
Page 31: Network Settings
Secondary DNS: Enter your second IPv4 or IPv6 DNS server address IPv4 DHCP: Check this box if the IP address is assigned by DHCP server. IPv4 Address: The IPv4 dynamic or static address Subnet Mask: Network range of the subnet Default Gateway: The default route going further from TV‐IP312PI IPv4 subnet IPv6 IPv6 Mode: Choose Manual, DHCP, or Route Advertisement. Click View Route Advertisement to find a route advertisement. IPv6 Address: IPv6 address of TV‐IP312PI Prefix Length: Length of network prefix Default The default route going further from TV‐IP312PI IPv6 Gateway: subnet © Copyright 2017 TRENDnet. All Rights Reserved. 31 ... -
Page 32: Port
Server Address: Enter the DDNS server address. port number is 554. Domain: Enter your registered domain/host name on selected HTTPS Port: The secured web service port. You can change the DDNS service. port number, or you can disable the service by User Name: Enter the account name. uncheck the box. The default port number is 443. Password: Enter the password. Click Save to save the changes Confirm: Enter the password again. Click Save to save the changes © Copyright 2017 TRENDnet. All Rights Reserved. 32 ... -
Page 33: Pppoe
Setup PPPoE (ADSL) connection to connect your camera with your ISP, SNMP Settings allows you to assign the contact details, location, community name and trap settings of SNMP. This is a networking management protocol Internet Service Provider. used to monitor network‐attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of a network. Upon receiving these messages, SNMP compatible devices (called agents) return data stored in their Management Information Bases. PPPoE (ADSL) Enable PPPoE: Check this box to enable PPPoE connection. Dynamic IP: The IP address assigned by ISP User Name: Enter the account name. Password: Enter the password. Confirm: Enter the password again. Click Save to save the changes © Copyright 2017 TRENDnet. All Rights Reserved. 33 ... - Page 34 Trap Community: Specify the name of SNMP trap community. SNMP Other Settings SNMP V3 SNMP Port: SNMP service port number. Enable SNMPv3: Check this box to enable SNMP v3 management. Read User Name: SNMP v3 member user name. Click Save to save the changes Security Level: Choose one of the security levels. Authentication Choose the authentication method to verify the Algorithm: source of information: MD5 or SHA. Authentication Specify the authentication password between 8 to Password: 32 letters. Private‐key Choose the privacy key to encrypt SNMP messages: Algorithm: DES or AES. Private‐key Specify the privacy key between 8 to 32 letters. Password: Write User SNMP v3 manager user name. Name: Security Level: Choose one of the security levels. © Copyright 2017 TRENDnet. All Rights Reserved. 34 ...
-
Page 35: Ip Address Filter
Type: Allowed to allow listed host to access this camera. service. 802.1X: Add: Click Add to add a user account EAPOL version: Extensible Authentication Protocol (EAP) over LAN Modify: To modify an entry on the list, highlight the entry by (EAPoL). Choose version 1 or 2. This version number clicking on it. Then, click the Modify button. has to match to your 802.1X service EAPOL version. User Name: Enter the account name. Password: Enter the password. Confirm: Enter the password again. Enter the IP address then click OK Click Save to save the changes Delete: To delete an entry on the list, highlight the entry by clicking on it. Then, click Delete Clear: To clear all entries, click Clear Click Save to save the changes © Copyright 2017 TRENDnet. All Rights Reserved. 35 ... -
Page 36: Quality Of Service (Qos)
Services Code Point (DSCP) bits on outgoing data streams. The QoS capable network device will forward different data in different priorities. The meaning of the value is different in different DiffServ domains. Consult your network manager for the setup details. UPnP Enable UPnP: Check this box to enable UPnP connection. Friendly Name: The name that will be appeared when searched. IP Address Filter Video/Audio Enter Video/Audio DSCP. Default: 0. Port Mapping DSCP: Enable Port Check this box to enable UPnP connection. Mapping: Event/Alarm Enter Event/Alarm DSCP. Default: 0. DSCP: Port Mapping Choose Manual or Auto port mapping. Management Enter Management DSCP. Default: 0. Mode: DSCP: External Port: Choose the port number for mapping. Click Save to save the changes Click Save to save the changes © Copyright 2017 TRENDnet. All Rights Reserved. 36 ... -
Page 37: Video Settings
Video Settings Video Encoding: Choose the video stream you want to modify. H.264 and MJPEG videos are always streaming and can be configured separately Video Format Resolution: H.264 MJPEG Adjust the format of video. Bitrate Type: Choose between variable bit rate or constant bit rate for video compression. The default is variable rate. Video Quality: Choose the video quality. The default is medium quality. Frame Rate: Choose the capturing frame rate. The default value is 30 frames per second. Reduce the frame rate to reduce the capture file size. Max. Bitrate: Choose the maximum video sampling bit rate. Default: 4096 I Frame Interval An I Frame is a frame that records a complete picture. Frames between I frames, (P frame or B frame) only records the image differences between two frames. Choose the I Frame Interval here. The default is 60. Click Save to save the changes © Copyright 2017 TRENDnet. All Rights Reserved. 37 ... -
Page 38: Display Settings
TRENDnet User’s Guide TV‐IP312PI Display Settings Adjust video image quality, lightness, and color settings here. Brightness: Use the slider or enter a number (0‐100) to adjust the image brightness. Default: 50 Contrast: Use the slider or enter a number (0‐100) to adjust the image contrast. Default: 50 Saturation: Use the slider or enter a number (0‐100) to adjust the color saturation. The greater number means the color will be more saturated. Default: 50 Hue: Use the slider or enter a number (0‐100) to adjust the color shade. Default: 50 Sharpness: Use the slider or enter a number (0‐100) to adjust the image sharpness. Default: 50 © Copyright 2017 TRENDnet. All Rights Reserved. 38 ... - Page 39 Video Standard: This is the base frequency for the video refresh rate. It is recommended to set to the same frequency of your Position adjustments local video standard (NTSC: 60, PAL: 50). Default: Mirror: 60Hz. Day/Night Choose whether you want the Switch: camera to be set to the day mode Choose horizontal, vertical or both to adapt to the (color video) or night mode (IR physical position of installation. enhanced black/white video). You can manually set it to day mode or night mode, adjust by lighting (Auto), or pre‐define schedule. Auto: Switch Time: The time delayed to switch between modes. Longer switch time can prevent unnecessary mode flipping if an object is blocking the light source temporarily. Range: 5‐120 seconds, default: 5 seconds. © Copyright 2017 TRENDnet. All Rights Reserved. 39 ...
-
Page 40: On Screen Display Settings
Change the range (0‐ Date Format: Select the date format 100%) to change the adjacency effect, default : 50% Display Mode: Choose how the text will show on the screen. Time DNR Level: Adjust the 3D digital noise reduction. OSD Size: Select the text size from 16 to 64 or adjusted by Compare and reduce noise between video frames. screen size automatically. Range: 0‐100%, default : 100% Move the red box to position the text. Click Save to save the changes. Click Reset to reset the display adjustments © Copyright 2017 TRENDnet. All Rights Reserved. 40 ... -
Page 41: Text Overlay
Create a masking area to keep your privacy. You can create up to four independent masking areas by clicking and dragging on the screen. Check Box: Check this box to enable text overlay. Text Field: Enter the text you want to display. You can enter your local language if you want. The text field allows Enable Privacy Mask: Check this box to enable privacy masking. maximum 44 English letters or 20 non‐English Stop Drawing: Click this button to stop drawing. characters. Clear All: Click this button to clear all the masking areas. Move the red box to position the text. Click Save to save the changes Click Save to save the changes © Copyright 2017 TRENDnet. All Rights Reserved. 41 ... -
Page 42: Video Recording
1. Select day of the week you want to edit. 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you Pre‐record: Recording time before trigger event. want to trigger the video recording Post‐record: Recording time after trigger event. continuous (always recording) or motion Overwrite: Select Yes to allow older recordings to be detection. overwritten. 4. Click Select All or the weekday you want Enable Record Check this box and then click Save to enable video to have the same schedule on different Schedule: recording. day. 5. Click another day of the week by clicking Click Save to save the changes on its tab to set the next schedule. Click OK when you have finished your settings. © Copyright 2017 TRENDnet. All Rights Reserved. 42 ... -
Page 43: Events
Enable Check this box to enable motion detection. Click Save Motion to save the choice. Detection: Enable Check this box to enable motion tracking. Motion Motion tracking is a dynamic display that shows the current Tracking: status of motion detection. The motion tracking is displayed with grids in green. The grid area represents the camera motion is happening. Click Save to save the choices. © Copyright 2017 TRENDnet. All Rights Reserved. 43 ... - Page 44 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. 4. Click Select All or the weekday you want to have the same schedule on different day. 5. Click another day of the week by clicking on its tab to set the next schedule. Click OK when you have finished your settings. Arming Schedule Actions Edit: Click Edit to edit the recording schedule. The Edit Send Email: Check this box to send an e‐mail notification when Schedule window will pop up. motion is detected. Network Check this box to record video to network storage Storage: when motion is detected. Upload to FTP: Check this box to send snapshots to an FTP server when motion is detected. Click Save to save the changes © Copyright 2017 TRENDnet. All Rights Reserved. 44 ...
-
Page 45: Video Tamper
Check this box to enable tamper detection. Click Save Tamper to save the settings. Detection: This is to detect if the camera has been tampered with and surveillance is Draw Area: Click Draw Area button to start drawing. Click and drag compromised. You can set up tamper proof notifications to alert the system on the area you want to set up the tamper detection. manager to check the camera. You can setup only one area for tamper detection. Click Stop Drawing to stop drawing motion detection areas. The gray block represents the detection area. Sensitivity: Move the slider to adjust detection sensitivity. Clear All: Click this button to clear all the set up areas. © Copyright 2017 TRENDnet. All Rights Reserved. 45 ... -
Page 46: Exception
1. Select day of the week you want to edit. 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. 4. Click Select All or the weekday you want to have the same schedule on different day. 5. Click another day of the week by clicking on Notification its tab to set the next schedule. Click OK Exception Type: First, choose the exception type, and then choose when you have finished your settings. the corresponding action. Send Email: Check this box to send an e‐mail notification when motion is detected. Notification Click Save to save the changes Send Email: Check this box to send an e‐mail notification when motion is detected. Click Save to save the changes © Copyright 2017 TRENDnet. All Rights Reserved. 46 ... -
Page 47: Snapshot
Format: Save snapshots in JPEG format Resolution: Uses the same resolution set in Video Format for the snapshot resolution. Quality: Choose a compression quality for snapshot. Interval: State the time interval between this series of snapshots. The default interval is 1 second. Capture State how many snapshots you want to take in a single Number: triggered event. Default: 3 pictures. Click Save to save the changes Continuous Enable: Check this box to take snapshots continuously. Format: Save snapshots in JPEG format Resolution: Uses the same resolution set in Video Format for the snapshot resolution. Quality: Choose a compression quality for snapshots. © Copyright 2017 TRENDnet. All Rights Reserved. 47 ... -
Page 48: Email
Test Button: Send test email to Receiver1 Receiver 1’s The first receiver’s email address. Address: Receiver 2: The second receiver’s name. Receiver 2’s The second receiver’s email address. Address: Receiver 3: The third receiver’s name. Receiver 3’s The third receiver’s email address. Address: Sender Click Save to save the changes Sender: Enter the name to be appeared as the email sender. *Note: Many ISPs does not allow service port 25 going through their network. Other Sender’s Enter sender’s email address. popular ports are 587 and 465. Please consult your email service provider and ISP for Address: detail. SMTP Server: Simple Mail Transportation Protocol Server address, the outgoing email server address. It may be has © Copyright 2017 TRENDnet. All Rights Reserved. 48 ... -
Page 49: Network Storage
Click on the entry to change the non‐blank letters if no authentication is required. settings and click Save to save the settings. Click Save to save the changes. The camera may reboot to make the network storage available. Go to the next section to format and manage your network storage. Tip: To create a network storage on your Windows® based system, create a shared folder and then test your set up with another computer. Enter the IP address of the computer here and enter the shared folder name with a leading forward slash. For example, if you have a shared folder named “SMB”, enter “/SMB” in the File Path. © Copyright 2017 TRENDnet. All Rights Reserved. 49 ... -
Page 50: Storage Management
Modifying these files may cause recording and playback problems. Access your recording and system log via the web management user interface to download the recording and snapshots. Capacity: The total capacity this network storage can use. Free Space: The free space left for video recording, snapshot and log. Status: The connection status to the network storage. Property: This network storage is read only or can be read and write. Progress: The progress of ongoing task. Note: The formatting progress depends on the size of the storage and the network bandwidth. It takes a while if you are formatting a big volume or the network connection is not stable. © Copyright 2017 TRENDnet. All Rights Reserved. 50 ... -
Page 51: Ftp Server
Enable Snapshot Check this box if you want to store snapshots on the to FTP: FTP. Server Address: Enter the FTP server IP address. Port: Enter the service port number of the FTP server. User Check Anonymous if the FTP server does not require Name/Anonymous authentication. Enter the User Name if the FTP : server requires authentication. Password: Enter the password of the FTP account. Confirm: Enter the password again to make sure the password was entered correctly. Directory When saving snapshots on an FTP server, they can Structure: be saved in a single place or organized with meaningful directory names. Save in root directory: You can choose to store all files in the same folder of FTP login. © Copyright 2017 TRENDnet. All Rights Reserved. 51 ... -
Page 52: Regulations
This product is RoHS compliant. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. © Copyright 2017 TRENDnet. All Rights Reserved. 52 ... -
Page 53: Europe - Eu Declaration Of Conformity
Directiva2004/108/CE e 2006/95/CE. Slovensko TRENDnet izjavlja, da je ta TV‐IP312PI v skladu z bistvenimi Eesti [Estonian] Käesolevaga kinnitab TRENDnet seadme TV‐IP312PI vastavust [Slovenian] zahtevami in ostalimi relevantnimi določili direktiivi 2004/108/EÜ ja 2006/95/EÜ põhinõuetele ja direktive2004/108/ES in 2006/95/ES. nimetatud direktiivist tulenevatele teistele asjakohastele Slovensky [Slovak] TRENDnettýmtovyhlasuje, že TV‐IP312PI sätetele. spĺňazákladnépožiadavky a English Hereby, TRENDnet, declares that this TV‐IP312PI is in všetkypríslušnéustanoveniaSmernice 2004/108/ES a compliance with the essential requirements and other relevant 2006/95/ES. provisions of Directive 2004/108/EC and 2006/95/EC. Suomi [Finnish] TRENDnet vakuuttaa täten että TV‐IP312PI tyyppinen laite on Español [Spanish] Por medio de la presente TRENDnet declara que el TV‐IP312PI direktiivin2004/108/EY ja 2006/95/EY oleellisten vaatimusten ja cumple con los requisitos esenciales y cualesquiera otras sitä koskevien direktiivin muiden ehtojen mukainen. disposiciones aplicables o exigibles de la Directiva 2004/108/CE Svenska [Swedish] Härmed intygar TRENDnet att denna TV‐IP312PI står I y 2006/95/CE. överensstämmelse med de väsentliga egenskapskrav och övriga Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑTRENDnet ΔΗΛΩΝΕΙ ΟΤΙ TV‐IP312PI relevanta bestämmelser som framgår av direktiv 2004/108/EG ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ och 2006/95/EG. © Copyright 2017 TRENDnet. All Rights Reserved. 53 ... -
Page 54: Limited Warranty
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO products that are replaced become the property of TRENDnet. Replacement products EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN may be new or reconditioned. TRENDnet does not issue refunds or credit. Please CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, contact the point‐of purchase for their return policies. INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE TRENDnet shall not be responsible for any software, firmware, information, or ... - Page 55 ...