Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TRENDnet TV-IP323PI
Summary of Contents for TRENDnet TV-IP323PI
-
Page 2: Table Of Contents
TRENDnet User’s Guide TV‐IP323PI Log ........................ 18 Contents Search for logs...................... 19 Product Overview ................ 1 System Information .................... 20 Features ........................1 Logout ........................ 20 Specifications ......................1 System Configuration .............. 21 Package Contents ....................2 Device Settings ..................... 21 Front View .......................3 User Accounts ....................... 22 Angle Adjustment ....................3 Time Settings ...................... 22 Hardware Reset Button ...................3 Daylight Savings .................... 23 Warnings ........................4 Live View Settings .................... 23 Cautions ........................4 Maintenance ... - Page 3 TRENDnet User’s Guide TV‐IP323PI Privacy Mask ...................... 36 Video Recording .................... 37 Events ..................... 3 8 Motion Detection .................... 38 Face Detection ...................... 40 Intrusion Detection .................... 41 Line Crossing Detection .................. 43 Video Tampering .................... 44 Notification ...................... 46 Snapshot ....................... 46 Email ........................ 47 Storage ................... 4 9 Network Storage .................... 49 Storage Management ................... 50 FTP Server ...................... 51 Regulations .................. 5 2 Federal Communication Commission Interference Statement ........ 52...
-
Page 4: Product Overview
TRENDnet User’s Guide TV‐IP323PI Specifications Product Overview 4 Megapixel Record up to 4MP HD video (2560 x 1440) at 30 fps in the space saving H.265 compression format Smart IR Smart IR dynamically adjusts the Infrared (IR) LEDs by lowering the IR intensity when objects are near, and increasing IR intensity when objects are farther away. Night‐time viewing up to 30 meters (98 ft.) away. PoE Save installation costs with Power over Ethernet (PoE) Outdoor Ready Outdoor IP67 weather rated housing Features 3‐Axis Adjustment TRENDnet’s Indoor/Outdoor 4MP H.265 PoE IR Fixed Turret Network Camera, Manually adjust the pan and tilt angles to find the optimal camera lens model TV‐IP323PI, provides day and night surveillance with a night vision position range of up to 30 meters (98 ft.). This fixed turret network camera delivers year‐round surveillance with an IP67 weather rated housing to withstand ... -
Page 5: Package Contents
TRENDnet User’s Guide TV‐IP323PI Motion Detection Package Contents Create custom motion detection zones to record video and send email TV‐IP323PI package includes: notifications when a zone is triggered. TV‐IP323PI Wide Dynamic Range (WDR) Weather seal Adjustable 120dB WDR setting improves image quality and focus when a Torx® Security Allen Key camera is exposed to high contrast lighting environments by enhancing the Quick installation guide dark areas of the image to make them more visible. Camera mounting hardware Recording Flexibility Define custom schedules using continuous (24/7) and event based recording modes. ONVIF Drilling Template Mounting Screws ONVIF Profile S and Profile G compliant ... -
Page 6: Front View
TRENDnet User’s Guide TV‐IP323PI Front View Angle Adjustment Loosen the Tilt‐Lock screw, rotate and angle the camera to your desired position, and then tighten the Tilt‐Lock screw. 6 (inside) 1. Mounting base Hardware Reset Button 2. Tilt‐Lock screw The hardware reset button is located under the removable cover labeled 3. Lens ... -
Page 7: Warnings
TRENDnet User’s Guide TV‐IP323PI Warnings Cautions Injury or equipment damage may be caused if any of these cautions are Serious injury or death may be caused if any of these warnings are neglected. neglected. Follow these precautions to prevent potential injury or material Follow these safety guards to prevent serious injury or death. damage. • If using the power adapter, please choose the power adapter that meets the safety extra low voltage (SELV) standard or IEC60950‐1 and • Make sure the power supply voltage is correct before using the Camera. Limited Power Source standard. • Do not drop the camera or subject to physical shock. ... -
Page 8: Plan For Installation Location
TRENDnet User’s Guide TV‐IP323PI • Sunlight: Avoid direct sun light exposure. Direct sun light will damage Plan for installation location the image sensor. If sunlight is necessary for your viewing purposes, provide protection for the image sensor. Viewing angle • Lighting: Consider installing your camera faces the same direction of The TV‐IP323PI is a fixed turret camera with a focused viewing angle (78) the light sources. Shooting images with top‐down position outdoor or that provides non‐distorted and detailed images. Choose the location where next to the existing light source are good choices. Avoid the light source has good angle to shoot the image you expect to see. The motion detection if it creates a shade that darkens the viewing area. area should also be considered when installing the camera. Weather Conditions The TV‐IP323PI is a small fixed turret camera, which fits most installations ... -
Page 9: Hardware Installation
TRENDnet User’s Guide TV‐IP323PI Hardware Installation Setup Your Camera with Camera Utility 1. Please download the utility at Cabling http://www.trendnet.com/camerautility It’s recommended that the wiring of the cables in your home or office be done by an installation professional. If you already have the cable deployed, make 2. Extract the downloaded file and double click on the camera utility file sure the cable and the connectors meet the category 5 Ethernet cable to install standards. At least 2 pairs of twisted lines are required for power and data. Poor cable quality may cause unexpected problems. Testing your cable or running a new cable is suggested for new camera installation. ... - Page 10 TRENDnet User’s Guide TV‐IP323PI 4. This will also require you to Install WinPcap program if you don’t have this installed before, please follow the on screen Instructions to 6. After the computer has restarted, double click on the Camera Utility icon Install It. to launch the program. 7. Find the camera you would like to access and configure then double click on the IP address. 5. Restart the computer after the Installation. 8. Continue to the next section Access your Camera with the Web Browser for detail configurations of the camera. © Copyright 2018 TRENDnet. All Rights Reserved. 7 ...
-
Page 11: Logging-In To The Camera For The First Time (Windows)
TRENDnet User’s Guide TV‐IP323PI Logging‐in to the Camera for the First Time (Windows) 3. The camera management page will detect if you installed the camera video streaming plug‐in or not. . Click the link to download the plug‐in 1. Find the camera from the Utility and double click on the IP address to from the camera. (For Internet Explorer and Safari only) Google and open the browser. Firefox users, skip to step 9. 2. Activate the admin User Account by entering your desired password, and ... - Page 12 TRENDnet User’s Guide TV‐IP323PI 5. Permission request may show up depends on the Internet security 7. Click Finish to finish the installation. settings on your computer. Click Yes to install the plug‐ in. 8. Open the browser and login again, enter the user name admin and new password again to start secured session. 6. Click Next to install the plug‐in. © Copyright 2018 TRENDnet. All Rights Reserved. 9 ...
-
Page 13: Logging-In To The Camera For The First Time (Os X)
TRENDnet User’s Guide TV‐IP323PI 9. Refresh the browser and the Live View page will show up and begin Logging‐in to the Camera for the First Time (OS X) streaming video 1. Open the web browser on your computer. In the address bar, enter the default IP address of the camera 192.168.10.30. If the camera is connected to a router/network, please use a windows machine to setup the camera with Camera Utility. 2. ... - Page 14 TRENDnet User’s Guide TV‐IP323PI 4. The camera management page will detect if you installed the camera 6. Go to the Finder and navigate to the Download folder. Command‐Click webcomponent plug‐in or not. Click the link to download the plug‐in from the WebComponents.pkg and then click Open. (If you are install the plug‐ the camera. in from the CD when you don’t have internet connection, just browse to /Mac folder and double click the WebComponents.pkg file.) Note: Internet connection is required to download the plug‐in. If you do not have Internet access, you can find the plug‐in on the CD comes with the package under /Mac folder. 7. Click Open with Installer to start installation. 5. Quit your browser completely by command‐Click on the browser icon ...
- Page 15 TRENDnet User’s Guide TV‐IP323PI 8. Click Continue to install the plug‐in. 10. Use the default location and click Install. 11. Enter your password and click Install Software 9. Select a destination to install the plug‐in. Then click Continue. © Copyright 2018 TRENDnet. All Rights Reserved. 12 ...
- Page 16 TRENDnet User’s Guide TV‐IP323PI 12. Installation will process automatically. 14. Open the browser and login again with the default IP 192.168.10.30 or the IP that was dynamically assigned by your router. Enter the user name, admin, and the default password, admin, and then click OK. 15. The Live View page shows up and the video starts to stream. 13. Click Close to exit the installation. © Copyright 2018 TRENDnet. All Rights Reserved. 13 ...
-
Page 17: Live View
TRENDnet User’s Guide TV‐IP323PI Live View After you log‐in into the camera management page, you’ll see the Live View page. Snapshot Click this icon to take a video snapshot. Zoom Click once to enable zoom. When enabled, click and drag the area on the picture to zoom in. Right click to resume 100% zoom. Click the icon again to disable zoom. The zoom function works in full screen mode as ... -
Page 18: Playback
TRENDnet User’s Guide TV‐IP323PI Playback Time Line There is a play back head in the center of the time line represented in a yellow You can playback the video recording on the network storage and download vertical line. To look for a specific video recording, move the time line by the video clip and snapshots to your local computer. clicking and dragging it. If the recording is short, zoom in by clicking button. Click to zoom out the time scale. If you know the exact time of ... -
Page 19: Playback
TRENDnet User’s Guide TV‐IP323PI Playback Slice images from video playback Use playback controls to play back the video recording. You can take snapshots from playback video or make new video clips from the video you are playing back. Click this button to play the video. Click this button to enable zoom. Then click and drag on Click this button to pause video playback. the video to define the area you want to zoom in. Click Click this button to stop playback. again to get back to 100% zoom. Click this button increase playback speed*. Double click to show video in full screen and press ESC on keyboard to exit full screen mode. Click this button decrease playback speed*. Click this button to disable zoom. Click to playback video frame by frame. Click again for ... -
Page 20: Download Sections Of Video
TRENDnet User’s Guide TV‐IP323PI Download sections of video Download snapshots To save complete video sections or snapshots, you can download the files directly. Click button to list snapshots to download Click button to download video sections. Check the time of the recording, select the videos you want to download, and Select the type of event that triggered the snapshots. then click Download. Choose the Start Time and End Time. Then, click Search ... -
Page 21: Log
TRENDnet User’s Guide TV‐IP323PI Log The log of the TV‐IP323PI will be saved on the network storage. You can search the relevant records and save to your local computer. (See © Copyright 2018 TRENDnet. All Rights Reserved. 18 ... -
Page 22: Search For Logs
TRENDnet User’s Guide TV‐IP323PI Storage on page 49 to setup the storage.) Search for logs Click the type of log and then the Start Time and End Time. Click Search to start searching. Click First Page, Prev Page, Next Page, and Last Page to show the logs. Click Save Log to save the logs to your computer. © Copyright 2018 TRENDnet. All Rights Reserved. 19 ... -
Page 23: System Information
TRENDnet User’s Guide TV‐IP323PI System Information Network Information System Information page shows the camera’s basic information. IP Address: IP address of the TV‐IP323PI Subnet Mask: Network range of IP address Default Gateway: The default route going from the TV‐IP323PI subnet. Primary DNS: Primary DNS server address Secondary DNS: Secondary DNS server address Logout Logging out of the camera configuration page Basic Information Device Name: Human readable device name for easy identification. Firmware Version: Firmware version MAC Address: The MAC address of Ethernet Interface Device Time: The system time setup in the camera. Keeping this time correct is important for recording, scheduled control and logging accurately. © Copyright 2018 TRENDnet. All Rights Reserved. -
Page 24: System Configuration
TRENDnet User’s Guide TV‐IP323PI Authentication System Configuration RTSP: TV‐IP323PI’s video stream can be accessed with RTSP, Real Time Streaming Protocol. Only the Device Settings administrator and users can view this video stream Un‐checking this box will allow everyone access to this video Setup your camera name and location for easy identification. This camera stream without authentication. Default: Checked. name will also be recognized by other network camera software as the name HTTP: TV‐IP323PI’s web management interface can be accessed of this camera. OSD, On Screen Display, camera name is referring to this with HTTP. Only the administrator and authorized users can ... -
Page 25: User Accounts
TRENDnet User’s Guide TV‐IP323PI User Accounts Time Settings You can setup up to 16 user accounts to access the camera’s video stream The accuracy of the system clock is important for scheduling and accurate with a web browser or real time video stream (RTSP). Only one administrator logging. You can synchronize the system time with your computer, or account can be setup to configure the TV‐IP323PI and cannot be deleted. automatically check the time accuracy with a network time server (NTP ... -
Page 26: Daylight Savings
TRENDnet User’s Guide TV‐IP323PI Daylight Savings Live View Settings Setup daylight savings. Setup the live view video quality, file size and file saving directories. Automatic Update Enable DST: Check this box if your time zone has daylight savings. Start Time: Enter the date that daylight savings starts End Time: Enter the date that daylight savings ends DST Bias Enter how much time the daylight saving adjusted by daylight savings. Click Save to save the changes Live View Parameters Protocol: Select the check box you would like the camera’s live view feed to use. Play Select the quality of the feed from the predetermined ... -
Page 27: Maintenance
TRENDnet User’s Guide TV‐IP323PI Record File Settings Maintenance Record file size: This size of live view video recording. You can choose 256MB, 512MB, or 1GB a file. Smaller file size is good You can restart, load camera settings and upgrade the camera firmware on for many short recordings. this page. Save record Click Browse and then choose a new destination if you files to: want to save the file somewhere else. Save Click Browse and then choose a new destination if you downloaded want to save the file somewhere else. files to: Picture and Clip Settings Save snapshots Click Browse and then choose a new destination if you in want to save the file somewhere else. live view to: Save snapshots Click Browse and then choose a new destination if you when playback want to save the file somewhere else. to: Save clips to: Click Browse and then choose a new destination if you want to save the file somewhere else. Click Save to save the changes ... -
Page 28: System Service
Firmware: Click Browse to find the latest firmware and then click Upgrade. Status: Shows the status in firmware upgrade. TRENDnet may periodically release firmware upgrades that might add features or fix problems associated with your camera. To find out if there is a firmware upgrade available for your device, please check your TRENDnet Hardware model and version using the link. Enable IR Select the check box to enable this feature. Light: Default: Checked ... -
Page 29: Network Settings
TRENDnet User’s Guide TV‐IP323PI Network Interface Network Settings MAC Address: Click this button to reboot this camera. TCP/IP Duplex and Choose one of the Ethernet duplex and speed to Speed: match your network. Default: auto. Setup your basic IPv4 and IPv6 network settings on this page. MTU: Maximum transmission unit. The maximum field size in the Ethernet packet. Multicast Sends a stream to the multicast group address and Address: allows multiple clients to acquire the stream at the ... -
Page 30: Port
TRENDnet User’s Guide TV‐IP323PI Port DDNS You can change the service port numbers of TV‐IP323PI and enable/disable Dynamic Domain Name Service, DDNS, allows you to find your camera from RTSP or HTTPS services. the Internet with an easy to remember domain name. Port Numbers HTTP Port: The default web access port. You can change the port number. However, you cannot disable the web service. The default port number is 80. DDNS RTSP Port: The Real‐Time Streaming Protocol port for video Enable DDNS: Check this box to enable DDNS Service. streaming. You can change the port number or ... -
Page 31: Pppoe
TRENDnet User’s Guide TV‐IP323PI PPPoE SNMP Setup PPPoE (ADSL) connection to connect your camera with your ISP, SNMP Settings allows you to assign the contact details, location, community name and trap settings of SNMP. This is a networking management protocol Internet Service Provider. used to monitor network‐attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of a network. Upon receiving these messages, SNMP compatible devices (called agents) return data stored in their Management Information Bases. PPPoE (ADSL) Enable PPPoE: Check this box to enable PPPoE connection. Dynamic IP: The IP address assigned by ISP User Name: Enter the account name. Password: Enter the password. ... - Page 32 TRENDnet User’s Guide TV‐IP323PI SNMP V1/V2 Security Level: Choose one of the security levels. Enable SNMPv1: Check this box to enable SNMP v1 management. Enable SNMPv2c: Check this box to enable SNMP v2c management. Read SNMP Specify the password to access the SNMP Community: community for read only access. Authentication Choose the authentication method to verify the Write SNMP Specify the password for access to the SNMP Algorithm: source of information: MD5 or SHA. Community: community with read/write access. Authentication Specify the authentication password between 8 to 32 Trap Address: Specify the IP address for the SNMP trap Password: letters. community. Private‐key Choose the privacy key to encrypt SNMP messages: Trap Port: Specify the port number for the SNMP trap ...
-
Page 33: Ip Address Filter
TRENDnet User’s Guide TV‐IP323PI IP Address Filter 802.1X Set up a list of clients allow only the clients on the list to access this camera Setup 802.1X for remote authentication service. or to reject clients on the list from access this camera. IP Address Filter Enable IP Check this box to enable IP address filtering service. 802.1X Authentication Address Filter: Enable IEEE Check this box to enable 802.1X authentication IP Address Filter Choose Forbidden to ban the listed IP addresses or 802.1X: service. Type: Allowed to allow listed host to access this camera. EAPOL version: Extensible Authentication Protocol (EAP) over LAN Add: Click Add to add a user account (EAPoL). Choose version 1 or 2. This version number Modify: To modify an entry on the list, highlight the entry by ... -
Page 34: Quality Of Service (Qos)
TRENDnet User’s Guide TV‐IP323PI Quality of Service (QoS) UPnP Setup traffic prioritization tags the video packets to go through network Universal Plug‐and‐Play is a device discovery protocol set. It allows your switches and routers with assigned priority. You can set the Differentiated camera to easily be found, for example, on a Windows operation system. Services Code Point (DSCP) bits on outgoing data streams. The QoS capable network device will forward different data in different priorities. The meaning of the value is different in different DiffServ domains. Consult your network manager for the setup details. UPnP Enable UPnP: Check this box to enable UPnP connection. IP Address Filter ... -
Page 35: Video Settings
TRENDnet User’s Guide TV‐IP323PI Bitrate Type: Choose between variable bit rate or constant bit Video Settings rate for video compression. The default is variable rate. Video Format Video Quality: Choose the video quality. The default is medium quality. Frame Rate: Choose the capturing frame rate. The default value is 30 frames per second. Reduce the frame rate to reduce the capture file size. Max. Bitrate: Choose the maximum video sampling bit rate. Default: 2048 I Frame Interval An I Frame is a frame that records a complete picture. Frames between I frames, (P frame or B frame) only records the image differences between two frames. Choose the I Frame Interval here. The default is 60. Click Save to save the changes Sub stream can be used for lower resolution needed application, for example mobile app streaming or NVR streaming. Third stream is used for Live view only, it has resolution limitation on Chrome, Firefox and Safari. Max resolution can be supported under Internet Explorer. Video Encoding: Choose the video stream you want to modify. Note: When H.264+/H.265+ is enabled, Live view on Chrome or Firefox will H.264 and H.265 videos are always streaming and be disabled due to browser limitation, you can continue to use Internet ... -
Page 36: Display Settings
TRENDnet User’s Guide TV‐IP323PI Display Settings Adjust video image quality, lightness, and color settings here. Brightness: Use the slider or enter a number (0‐100) to adjust the image brightness. Default: 50 Contrast: Use the slider or enter a number (0‐100) to adjust the image contrast. Default: 50 Saturation: Use the slider or enter a number (0‐100) to adjust the color saturation. The greater number means the color will be more saturated. Default: 50 Sharpness: Use the slider or enter a number (0‐100) to adjust the image sharpness. Default: 50 © Copyright 2018 TRENDnet. All Rights Reserved. 33 ... - Page 37 TRENDnet User’s Guide TV‐IP323PI Light sensitivities Schedule: Smart IR: Smart IR can adjust the strength of infrared lights at Use quick selection or enter the time down below. Click OK to confirm the time you want to set. night depending on the distance of an object to maintain the maximum IR light distance and while maintaining a clear picture when object is close by. Default: On. Max. Exposure Adjust this value for exposure time for Time: each picture. You can choose a value between 1/3 second to 1/100,000 second. The default value is 1/30 second exposure time for each picture. Start Time: The start time for day mode. Stop Time: The start time for day mode. Video Standard: This is the base frequency for the video refresh rate. It is recommended to set to the same frequency of your Position adjustments local video standard (NTSC: 60, PAL: 50). Default: Mirror: 60Hz. Day/Night Choose whether you want the Switch: camera to be set to the day mode Choose horizontal, vertical or both to adapt to the (color video) or night mode (IR physical position of installation. ...
-
Page 38: On Screen Display Settings
TRENDnet User’s Guide TV‐IP323PI Image adjustments On Screen Display Settings Back Light Back light compensation: Setup a fixed light source Display the camera name and the time the video is shooting on the screen Compensation position to compensate and adjust the image in the and dark. Wide‐Dynamic‐ Choose the area that you want to enhance (dark area, Range: not light source). Note: By default, the WDR is disabled. Please enable WDR to set up back light compensation. WDR: Wide Dynamic Range compensates for the dark area dynamically. WDR Level: The level of compensation. Range: 0‐ 100%, default: 20%. White Balance: ... -
Page 39: Text Overlay
TRENDnet User’s Guide TV‐IP323PI Text Overlay Privacy Mask Display extra information on the screen over the image. Create a masking area to keep your privacy. You can create up to four independent masking areas by clicking and dragging on the screen. Check Box: Check this box to enable text overlay. Text Field: Enter the text you want to display. You can enter your local language if you want. The text field allows maximum 44 English letters or 20 non‐English ... -
Page 40: Video Recording
TRENDnet User’s Guide TV‐IP323PI Video Recording Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. 1. Select day of the week you want to edit. 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion Overwrite: Select the check box to allow older recordings to detection. be automatically overwritten. 4. Click Select All or the weekday you want Pre‐record: Recording time before trigger event. to have the same schedule on different Post‐record: Recording time after trigger event. day. 5. Click another day of the week by clicking Stream Type: Specify to record from the main stream or sub on its tab to set the next schedule. Click stream. OK when you have finished your settings. Enable Record ... -
Page 41: Events
TRENDnet User’s Guide TV‐IP323PI Enable Check this box to enable motion detection. Click Save Events Motion to save the choice. Detection: Motion Detection Enable Check this box to enable motion tracking. Motion Motion tracking is a dynamic display that shows the current Set up how the motion detection event will be triggered and what actions will Tracking: status of motion detection. The motion tracking is displayed with grids in green. The grid area represents be triggered. the camera motion is happening. Click Save to save ... - Page 42 TRENDnet User’s Guide TV‐IP323PI Arming Schedule Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. 1. Select day of the week you want to edit. 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want Normal Linkage / Network Storage to trigger the video recording continuous Send Email: Check this box to send an e‐mail notification when (always recording) or motion detection. motion is detected. 4. Click Select All or the weekday you want to Upload to Check this box to send snapshots to an FTP server have the same schedule on different day. FTP/Memory or the installed SD card when motion is detected. 5. Click another day of the week by clicking on ...
-
Page 43: Face Detection
TRENDnet User’s Guide TV‐IP323PI Face Detection Arming Schedule Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. Set up how the facial detection event will be triggered and what actions will be triggered. 1. Select day of the week you want to edit. 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. 4. Click Select All or the weekday you want to Face Detection have the same schedule on different day. Enable Face Check this box to enable the face detection feature. 5. Click another day of the week by clicking on Detection: its tab to set the next schedule. Click OK ... -
Page 44: Intrusion Detection
TRENDnet User’s Guide TV‐IP323PI Intrusion Detection Set up how the intrusion detection event will be triggered and what actions will be triggered. Normal Linkage / Network Storage Send Email: Check this box to send an e‐mail notification when motion is detected. Upload to Check this box to send snapshots to an FTP server FTP/Memory or the installed SD card when motion is detected. Card: Network You may select your configured network storage Storage: drives can be found here. Click Save to save the changes Intrusion Detection Area Settings Enable: Check this box to enable the intrusion detection feature. ... - Page 45 TRENDnet User’s Guide TV‐IP323PI 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. 4. Click Select All or the weekday you want to have the same schedule on different day. 5. Click another day of the week by clicking on its tab to set the next schedule. Click OK when you have finished your settings. Arming Schedule Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. Normal Linkage / Network Storage Send Email: Check this box to send an e‐mail notification when motion is detected. Upload to Check this box to send snapshots to an FTP server FTP/Memory ...
-
Page 46: Line Crossing Detection
TRENDnet User’s Guide TV‐IP323PI Line Crossing Detection Set up how the Line Crossing detection event will be triggered and what actions will be triggered. Arming Schedule Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. Line Crossing Detection Area Settings Enable: Check this box to enable the Line Crossing detection feature. Max. Size & Click this ... -
Page 47: Video Tampering
TRENDnet User’s Guide TV‐IP323PI 2. Select All Day or Customized schedule of the Video Tampering day. 3. Set the time period and the event you want This is to detect if the camera has been tampered with and surveillance is to trigger the video recording continuous compromised. You can set up tamper proof notifications to alert the system (always recording) or motion detection. manager to check the camera. 4. Click Select All or the weekday you want to have the same schedule on different day. 5. Click another day of the week by clicking on its tab to set the next schedule. Click OK when you have finished your settings. Enable Check this box to enable tamper detection. Click Save Normal Linkage / Network Storage Tamper to save the settings. Detection: Send Email: Check this box to send an e‐mail notification when motion is detected. Draw Area: Click Draw Area button to start drawing. Click and drag Upload to ... - Page 48 TRENDnet User’s Guide TV‐IP323PI 1. Select day of the week you want to edit. 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. 4. Click Select All or the weekday you want to have the same schedule on different day. 5. Click another day of the week by clicking on its tab to set the next schedule. Click OK when you have finished your settings. Notification Send Email: Check this box to send an e‐mail notification when motion is detected. Click Save to save the changes Arming Schedule Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. © Copyright 2018 TRENDnet. All Rights Reserved. 45 ...
-
Page 49: Notification
TRENDnet User’s Guide TV‐IP323PI Notification Snapshot You can set up your camera to continuously taking snapshots or taking Provide notifications for other system events, set up your notifications here. snapshots only when events happening. Notification Notification First, choose the exception type, and then choose Type: the corresponding action. Send Email: Check this box to send an e‐mail notification when Timing motion is detected. Enable Timing Check this box to take snapshots continuously. Snapshot: Click Save to save the changes Format: Save snapshots in JPEG format Resolution: Uses the same resolution set in Video Format for the ... -
Page 50: Email
TRENDnet User’s Guide TV‐IP323PI Event triggered Email Enable Event‐ Check this box to take snapshots when an event is Triggered occurred. Set up email accounts for notifications. Snapshot: Format: Save snapshots in JPEG format Resolution: Uses the same resolution set in Video Format for the snapshot resolution. Quality: Choose a compression quality for snapshot. Interval: State the time interval between this series of snapshots. The default interval is 1 second. Capture State how many snapshots you want to take in a single Number: ... - Page 51 TRENDnet User’s Guide TV‐IP323PI SMTP Server: Simple Mail Transportation Protocol Server address, the outgoing email server address. It may be has address as your incoming email server, maybe not. Please ask your email service provider for detail. SMTP Port: Service port number for outgoing email.* E‐mail If your service provider requires SSL or TLS Encryption: encryption, please specify here. Attach Check Attach Image if you want to send a snapshot Image/Interval: image with the email notification and select the ...
-
Page 52: Storage
TRENDnet User’s Guide TV‐IP323PI Storage No: The sequential number of the network storage. Network Storage Type: The type of storage. Server Enter the IP address of your network storage. Network Storage must be setup before it can be managed. For storage Address: File Path: Enter the shared folder as file path for network storage. You management, please refer to the next section. can create a folder under the shared folder and make it a ... -
Page 53: Storage Management
TRENDnet User’s Guide TV‐IP323PI Storage Management Format: Select a network storage volume and then click Format to Network Storage must be setup before it can be managed. To setup storage, format your network storage. This action will format the please refer to the previous section. network volume (shared folder) for video recording. Placeholder files (formatting files) will be created to make ... -
Page 54: Ftp Server
TRENDnet User’s Guide TV‐IP323PI FTP Server Enable Snapshot to Check this box if you want to store snapshots on the FTP: FTP. Server Address: Enter the FTP server IP address. Port: Enter the service port number of the FTP server. User Check Anonymous if the FTP server does not Name/Anonymous: require authentication. Enter the User Name if the FTP server requires authentication. Password: Enter the password of the FTP account. Confirm: Enter the password again to make sure the password was entered correctly. Directory Structure: When saving snapshots on an FTP server, they can be saved in a single place or organized with meaningful directory names. Save in root directory: You can choose to store all files in the same folder of FTP login. Save in directory: Structure your folders with camera name or IP address. Directory: Use Camera Name: Use the camera name to organize the saved files. Use Camera IP: Use the camera IP address to ... -
Page 55: Regulations
TRENDnet User’s Guide TV‐IP323PI Regulations IMPORTANT NOTE: Federal Communication Commission Interference Statement FCC Radiation Exposure Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are This equipment complies with FCC radiation exposure limits set forth for an designed to provide reasonable protection against harmful interference in a uncontrolled environment. This equipment should be installed and operated residential installation. This equipment generates uses and can radiate radio with minimum distance 20cm between the radiator & your body. frequency energy and, if not installed and used in accordance with the This transmitter must not be co‐located or operating in conjunction with any instructions, may cause harmful interference to radio communications. other antenna or transmitter. However, there is no guarantee that interference will not occur in a particular ... -
Page 56: Europe - Eu Declaration Of Conformity
TRENDnet User’s Guide TV‐IP323PI Europe – EU Declaration of Conformity Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑTRENDnet ΔΗΛΩΝΕΙ ΟΤΙ TV‐IP323PI ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2004/108/EK, 2006/95/ΕΚ και. This device complies with the essential requirements of the Directive Français [French] Par la présente TRENDnet déclare que l'appareil TV‐IP323PI est conforme aux exigences essentielles et aux autres dispositions 2004/108/EC and 2006/95/EC. The following test methods have been applied pertinentes de la directive 2004/108/CE, 2006/95/CE et. in order to prove presumption of conformity with the essential requirements Italiano[Italian] Con la presente TRENDnet dichiara che questo TV‐IP323PI è of the Directive 2004/108/EC and 2006/95/EC: conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2004/108/CE e 2006/95/CE. Safety /EMC Latviski [Latvian] AršoTRENDnetdeklarē, ka TV‐IP323PI atbilstDirektīvas 2004/108/EK EN 55022:2010 + AC: 2011 Class A un 2006/95/EK būtiskajāmprasībām un citiemar to EN 61000‐3‐2: 2006 + A1: 2009 + A2: 2009 saistītajiemnoteikumiem. EN 61000‐3‐3: 2008 Lietuvių Šiuo TRENDnet deklaruoja, kad šis TV‐IP323PI atitinka esminius EN 50130‐4: 2011 + A1: 2014 ... -
Page 57: Limited Warranty
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO products that are replaced become the property of TRENDnet. Replacement products EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN may be new or reconditioned. TRENDnet does not issue refunds or credit. Please CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, contact the point‐of purchase for their return policies. INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE TRENDnet shall not be responsible for any software, firmware, information, or ... - Page 58 ...