Table of Contents
Advertisement
TRENDnet User's Guide
Upload Snapshot:
Check this box to send snapshots to an FTP server or
configured Network Storage when motion is
detected. Go to Network Storage or FTP to setup
server information
Network Storage
Check this box to send video clip to network storage
when motion is detected. Go to Storage > Network
Storage to setup Storage server information
Click Save to save the changes
Video Tamper
This is to detect if the camera has been tampered with and surveillance is compromised.
You can set up tamper proof notifications to alert the system manager to check the
camera.
© Copyright 2015 TRENDnet. All Rights Reserved.
Tampering Event
Enable Tamper Detection:
Check this box to enable tamper detection. Click Save
to save the settings.
Draw Area:
Click Draw Area button to start drawing. Click and drag
on the area you want to set up the tamper detection.
You can setup only one area for tamper detection.
Click Stop Drawing to stop drawing motion detection
areas. The gray block represent the detection area.
Sensitivity:
Move the slider to adjust detection sensitivity.
Clear All:
Click this button to clear all the set up areas.
Click Save to save the settings.
TV-IP312PI
34
Advertisement
Table of Contents
