Snmp - TRENDnet TV-IP420P User Manual

TRENDnet User's Guide
SNMP
SNMP Settings allows you to assign the contact details, location, community
name and trap settings of SNMP. This is a networking management protocol
used to monitor network‐attached devices. SNMP allows messages (called
protocol data units) to be sent to various parts of a network. Upon receiving
these messages, SNMP compatible devices (called agents) return data stored
in their Management Information Bases.
© Copyright 2016 TRENDnet. All Rights Reserved.
SNMP V1/V2
Enable SNMPv1: Check this box to enable SNMP v1 management.
Enable SNMPv2c: Check this box to enable SNMP v2c management.
Read SNMP Specify the password to access the SNMP
Community: community for read only access.
Write SNMP Specify the password for access to the SNMP
Community: community with read/write access.
Trap Address: Specify the IP address for the SNMP trap
community.
Trap Port: Specify the port number for the SNMP trap
community.
Trap Community: Specify the name of SNMP trap community.
SNMP V3
Enable SNMPv3: Check this box to enable SNMP v3 management.
Read User Name: SNMP v3 member user name.
Security Level: Choose one of the security levels.
Authentication Choose the authentication method to verify the
Algorithm: source of information: MD5 or SHA.
Authentication Specify the authentication password between 8 to
Password: 32 letters.
Private‐key Choose the privacy key to encrypt SNMP messages:
Algorithm: DES or AES.
Private‐key Specify the privacy key between 8 to 32 letters.
Password:
Write User SNMP v3 manager user name.
Name:
Security Level: Choose one of the security levels.
TV‐IP420P
33