Table of Contents
Advertisement
TRENDnet User's Guide
1.
Check the checkbox to enable the UPnP™ function.
Note:
Only when the UPnP™ function is enabled, ports of the camera are
active.
2.
Choose a friendly name for the camera, or you can use the default
name.
3.
Select the port mapping mode. Manual and Auto are selectable.
Note:
If you select Auto, you should enable UPnP™ function on the router.
If you select Manual, you can customize the value of the external port
and complete port mapping settings on router manually.
4.
Click Save to save the settings.
© Copyright TRENDnet. All Rights Reserved.
Network – Advanced Settings
SNMP
TV‐IP1328PI
20
Advertisement
Table of Contents
