Telephone Mode
When your machine is set to this mode, your machine will not receive documents automatically. If you receive a
fax call, follow the procedure below to receive documents manually.
Setting the Telephone Mode
1
Change Fax Parameter No. 15 (IN MODE) to 1 : Tel. (See page 37)
2
OUT
Confirm that the display is as shown to the right.
Operation of Telephone Mode
1
When your telephone rings, lift the handset of the External Telephone.
If you hear a beep from the phone, it means someone wants to send a fax. Or, if the
caller answers and says he/she wants to send a fax, then...
2
Remove any document from the ADF.
If you answered the call using the
External Telephone,
3a
START
4
Hang up the phone.
(see Note 1)
Note:
1. This procedure is called "REMOTE RCV" and will only work on a touch tone phone. If your extension phone is not
a touch tone phone, press
Receiving Documents
3b
START
on the control panel of your fax machine.
MAR-12-1999 15:00
RCV MODE=TEL
If you answered the call on an
Extension phone,
START
or
within 1 second from the
telephone key pad.
(See Note 1)
Your machine will be activated remotely.
4
00%
63