Manual Dialing to Connect to the CTX Modem
If the CTX WinAdmin application is running in Windows operating systems and you want to dial in to
CTX manually with a bridged telephone (operator-assisted dialing) instead of having CTX WinAdmin dial
the phone number, perform the following:
Connect to the CTX modem with manual dialing
Step 1:
1. Make sure that your dialing phone is bridge connected to your modem's "Line" jack.
2. Set up your modem dialing for Windows Operator-Assisted Dialing by opening Network Connections
in the Control Panel.
3. On the Advanced menu at the top of the screen, select Operator-Assisted Dialing, then Exit.
Make an operator-assisted call
Step 2:
1. Bring up the CTX
WinAdmin Connection
page (shown right).
2. Enter the CTX
Community Name (or
select a CTX Host
Name) and check Use
Dial-Up.
3. Enter a comma or a
phone number in this
box.
4. Click Connect Now.
5. Go off-hook with the
bridge telephone and
dial the CTX site
number.
6. When the call is
answered by a person or
Auto Attendant, ask to
be transfered to the CTX
modem number #19.
The called party should
then hang up.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
Step 4: Establish Communication with Strata CTX
7016
Installation
You must enter
a comma or a
phone number.
3-17