Set Time And Date - Toshiba CTX100-S Programming Manual

• Installed Equipment ID – There are five characters, each referencing a unique equipment
identification value assigned to hardware installed in your Strata CTX system. If the particular
hardware is not installed a "-" displays. The following are the equipment identifier designations.
• B – BBMS is installed.
• X – BEXS is installed.
• S – BSIS is installed.
• E – The Ethernet is installed.
• M – The Modem is installed.

Set Time and Date

This program enables you to change the system clock in Strata CTX.
Program Number(s): 902
Prerequisite Program:
Reference:
Access Sequence:
FB Name
Date 01
Time 02
)%
1. Press to enter current Strata CTX Date. See table above for format.
+ROG
2. Press to program.
)%
3. Press to enter current Strata CTX time. See table above for format.
+ROG
4. Press to program.
+ROG
5. Press to submit, then
6. Enter another program number to continue programming or press
mode.
Event Trace Control
This program enables you to trace message events occurring in Strata CTX.
Program Number(s): 903
Prerequisite Program:
Reference:
Access Sequence:
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
None
None
Login to programming mode from your telephone button pad:
+ROG    .
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter  and press +ROG.
FB Summary
Enter current system date in this field.
Enter the current time in this field.
+ROG
to return to the
None
Install SmartMedia card
Login to programming mode from your telephone button pad:
+ROG    .
Telephone Button Programming
Value
yymmdd format
yy = current year
mm = current month
dd = current day
hhmmss format
hh = current hour
mm = current minute
ss = current second
= prompt.
PROG
+ROG
again to exit programming
900 Series Programs
LCD Prompt
DATE=
TIME=
13-99