Service Programming Error Codes - Toshiba CTX100-S Programming Manual

Service Programming Error Codes

Program Code
32
50
500
50
82
96
32
501
33
33
51
52
502
80
96
98
49
80
503
96
98
504 33
53
506 80
98
Strata CTX Programming - Part 4: Appendices 11/03
Sub-
Occurred FB
parameter
7#
7$
7#
7$
7
-
7
7
7
7
7
7
-
7 — 7 '
7 (
7

7 — 7 '
7
7
7
7
Error Descriptions
A character that is not permitted is included in the Destination
number.
Although 2nd destination has been assigned, you cannot
remove the 1st destination.
You cannot assign the 2nd destination without the 1st
destination.
A value must be assigned to Destination 1if an assignment
was made in Destination 2.
The entered System Call Forward number does not exist in
the system.
System Call Forward Index number exceeds the system
capacity.
A character that is not permitted is included in the entered
Speed Dial number.
The entered Speed Dial number is out of range.
The pause assignment is wrong.
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or
numbering plan).
The entered number conflicts with an existing numbering
plan.
The entered extension does not exist. The entered Attendant
Console does not exist.
The Page group number entered exceeds the system's
capacity.
The number of allowable Device number per paging group
has been exceeded.
The entered External Generic Relay number conflicts with an
existing device, such as a door lock, etc.
IOU card is not registered in the system.
The Page group number entered exceeds the system's
capacity.
Device Number per paging group is exceeded.
The System Call Forward index entered is out of the range.
Account Code cannot be verified.
Account code confirmation digit does not coincide. (It is larger
than the value that was registered by Program 570.)
The Account code number exceeds the system's capacity.
System Error Codes
Service Programming Error Codes
B-21