Lcr Dialing Setup - Toshiba CTX100-S Programming Manual

Services
LCR Guide Page

LCR Dialing Setup

Program 102 – Flexible Access Codes
Use this program to change the LCR
access code. The default LCR access
code is 9. You can change the default
access code to any number from 0~9, *,
and/or #. Enter an access code number
that does not conflict with the existing
numbering plan.
Program 530 – DR/LCR Screening
Table.
Use this program to define special
dialing codes that are normally dialed in
front of telephone numbers (example
*82, *67). It defines what DR and LCR
action should be applied after users dial
the special code ("Bypass" or "Skip and
Apply" DR).
Program 117 – Public Dial Plan Digit
Analysis.
Use this program to prevent standard
telephone users from circumventing
DR by sending DTMF tones to the
PSTN before DR analysis is
complete. In LCR applications, it
allows calls to cut through to the
PSTN immediately so users do not
have to wait for a pause timer to cut
through after dialing a number.
9-17
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03