System & Station
Program *05 – Call Park Pickup Abbreviated Dialing
Program *05 – Call Park Pickup Abbreviated Dialing
Processor Type:
Program Type:
Initialized Default:
ÃÆ
ÃÆ
Ã!
Ã"
Program
05 Overview
This program assigns two Call Park Pickup abbreviated dialing codes to pick up parked calls. For
dialing convenience, the 1- (or 2-) digit abbreviation for Call Park Pickup replaces the Call Park
access codes #331 and #332. To park calls, Code #331 and #332 must still be used if the Program
3DUN LQ 2UELW
39
only applies to Call Park Pickup.
LED 01 blanks out the Call Park abbreviated dialing data.
Example:
If Park Pickup code #331 is changed to the digit "1", Park Pickup functions by dialing 1XXX,
where XXX is the orbit number in which the call is parked.
3-22
DK14, DK40i, All RCTUs
System
Blank
Tx
à $ Cyq
Tx
SELECT = 1
SELECT = Call Park type:
1 = Change #331 Call Park Pickup Code
2 = Change #332 Call Park Pickup Code
It is only necessary to change one code, but
each code can be changed to the same or
buttons are not available on a telephone. Changing the #331 and #332 codes
Cyq
Tx
Æ Æ Cyq
DATA = 1 or 2 digit abbreviated
dialing for Call Park Pickup.
Strata DK Programming 5/99
Tx
Æ Æ Cyq