Station Pdn Selective Copy - Toshiba CTX100-S Programming Manual

Station
Assignment

Station PDN Selective Copy

This screen provides you the option of selecting either all or some of the parameters to be copied to the
destination PDNs.
Using this screen you can do any of the following functions:
• Copy to multiple destination PDNs.
• Check All to highlight all the parameters
to be copied.
...or select individual/multiple
parameter(s) to be copied.
1. Select Station > Assignments. Enter the
Primary DN.
2. Click Submit > Copy. The Selective
Copy screen displays (shown right).
3. Check Highlight All to highlight all the
parameters to be copied.
...or select individual/multiple
parameter(s) to be copied.
If you want to copy almost all items
Note
and leave out a few, you can check
Highlight All and then click on the items that you don't want to copy to deselect them.
4. Click Copy Now to start the copying process.
5. When copy is complete, a dialog box displays that reads "End of Copy!"
Note You can return to the previous page and/or reselect copy to different destination PDNs by clicking
Back.
Station Extended List
The Extended List displays the following parameters that are set in Program 200—Station Equipment
Number, DKT/SLT, Extension/Voice Mail, Primary DN, User Name, PDN VMID, COS, DRL, FRL, LCR
Group, System Call Forward Template, Network COS and the quantity of Station Speed Dial bins.
To access the extended list
Select Station > Assignments > Extended List.
The Extended List spreadsheet displays after it downloads from the CTX (sample shown below). This
takes some time depending on the CTX connection speed and database size.
The screen may be kept up and moved around to use as a reference and can be printed. The Extended
List spreadsheet can be sorted by all 19 columns and sorting can be toggled between Ascending and
Descending order. The entire table can be printed using the Print button on the screen.
5-6
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03