Cos Override Assignment - Toshiba CTX100-S Programming Manual

Services
LCR/DR

510 COS Override Assignment

Prerequisite Program:
Assigns Class of Service Overrides and their parameters (COS, FRL, DRL, QPL).
1. Complete the
Record Sheet"
2. From the Program Menu, click Services
> System Param > COS Override.
3. Enter Program 510 data or Select a COS
Override Index and click Copy to copy
settings from the selected COS Override
Index.
4. Click Submit.
F
IELD
00 COS Override Index
01 COS Override Code
02 Set COS
03 Set DRL
04 Set FRL
05 Set QPL
06 Set Network COS
9-38
None
"COS Override Code
on page D-40.
D
ESCRIPTION
Select the COS Override index.
Possible values: 1~16 (default = no value)
Select the COS Override Code as entered by users. If no data is entered in this
field, any previously entered data is erased.
Possible values: Up to 8 ASCII characters (default = no value)
Select COS number for this override code.
Possible values: 1~32 (default = 1)
Select DRL number for this override code.
Possible values: 1~16 (default = 1)
Select FRL number for this override code.
Possible values: 1~16 (default = 1)
Select QPL number for this override code.
Possible values: 1~16 (default = 1)
Select Network COS index for this override code.
Possible values: 1~32 (default = 1)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03