Did/Dnis Table View - Toshiba CTX100-S Programming Manual

F
IELD
02 Frame Format
04 Receive PAD
05 Send PAD

DID/DNIS Table View

This screen provides the DID/DNIS Table View on the DID command page.
Important! To avoid any errors, you must first set the digit length under Trunk > ILG.
To access DID/DNIS table view
Click Trunk > DID/DNIS
Table View
...or use Program 309.
See "Table Views"
for table functionality.
Note You can navigate this
table using the ILG and
the DID/DNIS which are
the first and second drop-
downs between the
Previous and Next
buttons.
ISDN
The following program enables set up for ISDN related system settings.
317 ISDN BRI Trunk
Prerequisite Program:
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
D
ESCRIPTION
Select the Frame Format.
Possible values: SF Mode or ESF Mode (default)
Select the Receive PAD values.
Possible values: None, Plus 6 dB, Plus 3 dB, Zero dB (default), Minus 3 dB, Minus
6 dB, Minus 9 dB, Minus 12 dB or Minus 15 dB
Select the Send PAD values.
Possible values: None, Plus 6 dB, Plus 3 dB, Zero dB (default), Minus 3 dB, Minus
6 dB, Minus 9 dB, Minus 12 dB or Minus 15 dB
on page 2-6
100 page 4-1
Trunks
DID/DNIS Table View
6-21