System Ip Data Assignment - Toshiba CTX100-S Programming Manual

IP Telephone Programming
All programs and features found in this chapter require CTX Release 2.0 software or higher and
WinAdmin Release 2.1 software or higher. This covers IP and 2B-channel conference programming. For
CTX IP Telephone Programming guidelines, refer to
page A-1.

150 System IP Data Assignment

Prerequisite Program:
This command assigns IP data to the system.
1. From the Program Menu,
click IP-Telephone > System
IP Data. The Trunk System
IP data Assignment screen
displays (shown right)
2. Enter Program 150 data.
3. Click Submit.
F
IELD
01 Automatic Assignment
of Station ID
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
Appendix A – Applications, Tips and Tricks on
D
ESCRIPTION
Enable Automatic Assignment of Station ID when the IPT has no station ID. In
program 250, FB04 is the same parameter and is per terminal.
When IPT searches to connect a CTX with no station ID, CTX looks for a PDN
which is set this parameter as "automatic", and sends the PDN to the IPT and
IPT sets it in the setting of IPT.
Possible values: Enable or Disable (default)
8
6548
8-1