Ctx Processor Nic Interface Tcp/Ip Auto-Programming - Toshiba CTX100-S Programming Manual

Strata CTX Programming Guidelines
Step 1: Use Default Auto-programming to Start Up

CTX Processor NIC Interface TCP/IP Auto-programming

The following are the initial values of the LAN data that is automatically created for the system.
• Network TCP/IP. See
• IP address – 192.168.254.253
• Sub network master – 255.255.255.0
• Default gateway – 0.0.0.0
• IP routing table – Not used.
• SNMP Agent settings
• Community name – communityName
• IP address – 0.0.0.0 (not restricted by the IP address of the access source)
• Privileges –
community-id
•
• User level
• Trap destination
• Community name – Nothing
• IP address – Nothing
• Modem PPP Server settings
• IP Address – 192.168.255.254 (Strata CTX modem fixed IP address for Dial-up connections).
Public Numbering Plan Analyzed Digit Numbers (Program 117)
E911 Emergency Call to Outgoing Line Group (Program 550)
E911 Emergency Call Destination (Program 400)
System Mode
DAY1
DAY2
NIGHT
The emergency call destination is set for the first PDN as 200 or 2000 in the all operation mode (DAY1,
Day2, NIGHT).
1-8
"916 IP Configuration"
WRITE
– 1
– Super user
Public Numbering Plan
Analyzed Number
1NXX
N11
NXX
N = 2~9 and X = 0~9
Emergency Call Group
Number
1
Emergency Call Called Number
Index
1
1
1
on page 10-14.
Public Numbering Plan
Analyzed Digit Number
11
3
7
OLG1
1
Emergency Call Called Number
200 or 2000 (the first PDN)
200 or 2000 (the first PDN)
200 or 2000 (the first PDN)
Strata CTX Programming - Part 1: Getting Started 11/03