Service - Toshiba CTX100-S Programming Manual

Service

Program Number(s): 311 and 319
These commands assign Assigns Direct Inward System Access (DISA) properties.
1. From the Program Menu, click
Trunk > Service. The Trunk
Services screen displays (shown
right).
2. Enter Program 311 data.
3. Enter Program 319 data.
4. Click Submit.
311 DISA Security Code
Prerequisite Program:
Assigns DISA parameters.
F
IELD
01 DISA Enabled
02 DISA Code
03 Response Timer
04 Idle Timer
05 Tie Line Access
319 Intercept Treatment
Prerequisite Program:
This command assigns Intercept positions for Strata CTX Day/Night schedules. Intercept positions are
used when the destination of a trunk line call is not determined with DID or DIT.
F
IELD
Tenant Number
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
None
D
ESCRIPTION
Enable DISA security code.
Possible values: Enable or Disable (default)
Enter DISA security code.
Possible values: Up to 15 digits (default = no value)
Enter the time, in seconds, for Strata CTX to respond to a call.
Possible values: 0~30 (default = 5)
Enter the time in seconds to wait for idle DTMF.
Possible values: 0~60 (default = 10)
Enable this feature to allow DISA callers to access Tie lines when they call into the
system. (This feature is available with CTX R2.2 or higher and CTX WinAdmin
R2.2G.0 and higher.)
Possible values: Enable or Disable (default)
None
D
ESCRIPTION
Select the Tenant number for which the Intercept Destinations should be
assigned.
Possible values: 1~8.
Trunks
Service
6-19