Bipu Configuration - Toshiba CTX100-S Programming Manual

IP Telephone Programming

151 BIPU Configuration

151 BIPU Configuration
This program is used to set up the IP address of the specific BIPU card to support the IP-Telephone. BIPU
card must be assigned before configuring the specific BIPU card.
1. From the Program Menu, click IP-
Telephone > BIPU Configuration.
The BIPU Configuration screen
displays (shown right)
2. Enter Program 151 data.
3. Click Submit.
F
IELD
Cabinet & Slot Number
IP Address
Subnet Address
Default Gateway Address
Version Number of BIPU
8-4
D
ESCRIPTION
Enter the cabinet and slot number of the BIPU to be configured.
Note: BIPUs must first be installed using PRG100 - System\Card
Assignment.
BIPUs can be installed in the slots listed:
Possible values: Slots 01-08 (CTX100 and CTX670 Basic), 01-06
(CTX670 Exp).
Enter the BIPU IP Address.
Enter the Subnet Address of the BIPU.
Enter the Default Gateway Address of the BIPU card.
This is a read-only field.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
6550