Station Sd/ Name; Exchange (Co) Line Name; Dnis Name - Toshiba DP5000-Series User Manual

Administrator Programming
Administrator Mode

Station SD/ Name

1. Enter Administrator Mode.
2. Press
3. Press
4. Enter the DN number of the station whose speed dial you wish to label, display
will show DN XXXX IDX
5. Enter the two digit Speed Dial number you wish to program, display shows DN
XXXX IDX 01
6. Enter the name/label of this Station Speed Dial.
7. Press
8. To label additional Speed Dials for this extension, repeat steps 5~7.
9. To label Speed Dials for another extension, press
and repeat steps 4~7.

Exchange (CO) Line Name

1. Enter Administrator Mode
2. Press
3. Press
4. Enter the Exchange (CO) line number whose name you wish to change (001~264),
if you enter 001 display will show Exchange (CO) Line 001
5. Enter the name/label for the Exchange (CO) Line
6. Press
7. Repeat steps 4~6 to change addition Exchange (CO) Line names.

DNIS Name

1. Enter Administrator Mode.
2. Press
3. Press
4. Enter the ILG number whose name you wish to change (001~128), if you enter 001
display will show ILG 001
5. Enter the name/label for the ILG.
6. Press
7. Repeat steps 4~6 to change addition ILG names.
100
Next
three times, display will show Station SD/Name
, display shows DN ID
to save your changes.
Next
four times, display will show Exchange (CO) Line Name.
, display will show Exchange (CO) Line.
to save your changes.
Next
five times, display will show DNIS Name.
, display will show ILG (Incoming Line Group)
to save your changes.
Rtrn
Strata CIX DP5000-series Telephone User Guide
, display will show DN ID
05/09