Chapter 7 Communication Procedure - Mitsubishi Electric QJ71E71-100 User Manual

CHAPTER 7
This chapter describes the procedure for communicating with connected devices after the E71 is connected to
Ethernet. For the procedure for connecting the E71 to Ethernet, refer to "PROCEDURES BEFORE OPERATION".
( Page 60, CHAPTER 4)
COMMUNICATION PROCEDURE
Continued from PROCEDURES BEFORE OPERATION
Parameter settings
Set parameters other than the basic setting and Ethernet
operation setting when required.
Starting the CPU module
Update the settings by powering off and on the CPU module
or resetting the CPU module.
Initial process
The process is automatically performed with default settings
of the parameters.
Open process
Establish connections with connected devices.
Close process
Disconnect (cancel) connections with the connected devices
where connections have been established by the open process.

CHAPTER 7 COMMUNICATION PROCEDURE

Data communications
using each function
Page 82, Section 7.1,
Parameter setting of each
function
QCPU User's Manual
(Hardware Design,
Maintenance and Inspection)
Page 88, Section 7.2,
Page 96, Section 7.3
Page 88, Section 7.2,
Page 96, Section 7.3
81
7