For Use With A Basic Model Qcpu Or Safety Cpu - Mitsubishi Electric QJ71E71-100 User Manual

5.1.2

For use with a Basic model QCPU or safety CPU

When an E71 is mounted to a Basic model QCPU or a safety CPU, the available functions are restricted as follows.
Connection with MELSOFT products and a GOT
MC protocol communications
Communications using SLMP
Data communications using the predefined protocol
Communications using a fixed buffer
Receive process using an interrupt program
Pairing open
Broadcast communications
Communications using a random access buffer
IP filter function
Remote password
Router relay function
Communications using an auto-open UDP port
Connected device alive check function
E-mail function
CC-Link IE Controller Network, CC-Link IE Field Network, MELSECNET/H,
MELSECNET/10 relay communications
Communications using data link instructions
Receive process using an interrupt program
File transfer (FTP server function)
Web function
*1 This function can be used in a Basic model QCPU with the function version B or later. For the version of a programming
tool, check the corresponding software version. (
*2 The connection numbers 1 to 8 only can be specified. If the specified value is out of range, an "OPERATION ERROR"
(error code: 4101) occurs.
*3 When the target station of the SREAD/SWRITE instructions is a Basic model QCPU or safety CPU, the read notification
device to the target station set to the argument (D3) is ignored. The operation of the SREAD/SWRITE instructions is the
same as that of the READ/WRITE instructions. For the SREAD/SWRITE instructions, refer to the following.
MELSEC-Q/L Ethernet Interface Module User's Manual (Application)
Function
Page 429, Appendix 11.1)
CHAPTER 5 SYSTEM CONFIGURATION
: Available, ×: Not available
Availability
Basic model
Safety CPU
QCPU
×
*2
*1
×
×
*1
*1
×
×
*3 *3
*1
×
×
×
5
63