Mitsubishi Electric QJ71E71-100 User Manual page 80

To prevent the influence of high-frequency noise using ferrite cores, install them on the E71 side, connected device side, and
transceiver side on the AUI cable. (Ferrite core used for the tests conducted by Mitsubishi Electric Corporation: ZCAT 2032-
0930 from TDK Corporation)
(2) Disconnecting the cable
1.
Slide the retainer in the orientation A, hold the connector on the AUI cable, and pull out the cable.
2.
Slide the retainer in the orientation B.
78
QJ71E71-B5
Ferrite core
AUI cable
10BASE5 coaxial cable
Transceiver