Table of Contents
Advertisement
CHAPTER 6
This chapter describes installation and wiring of the E71.
6.1
Installation
This section describes installation of the E71.
(1) Installation method
For details on installation of the E71, refer to the following.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
(2) Handling precautions
The precautions for handling the E71 are described below.
• Do not drop or apply strong shock to the E71 case since it is made from resin.
• Tighten screws such as module fixing screws within the following range.
External power supply terminal screw (M2.5)
Module fixing screw (M3)
*1
This terminal is an external power input terminal for supplying power to a transceiver when the E71 is connected to the
10BASE5 network.
*2
A module can be easily fixed onto the base unit using the hook at the top of the module. However, it is recommended to
secure the module with the module fixing screw if the module is subject to significant vibration.
INSTALLATION AND WIRING
Screw
*1
*2
CHAPTER 6 INSTALLATION AND WIRING
Tightening torque range
0.40N•m
0.36 to 0.48N•m
6
75
Advertisement
Table of Contents
Troubleshooting
