Mitsubishi Electric QJ71E71-100 User Manual page 363

(d) Writing directly to the buffer memory
The following shows an example where the stored values in the TCP Maximum Segment Transmission setting
area and Communication condition setting (Ethernet Operation Setting) area is changed (when the I/O signals
of the E71 are X/Y00 to X/Y1F). Create a program with a contact (such as a flag for user) indicating the status
of the open completion signal storage area.
Process upon completion
Process upon abnormal end
Communications enabled
APPENDICES
Set "Disable TCP Maximum
Segment Size Option
transmission".
Set "ASCII Code".
Set "Use the KeepAlive".
Set "IEEE 802.3".
Set "Enable" for Setting of
write enable/disable at
RUN time.
Set "Always wait for OPEN".
Reinitialization process
request
361
A