(b) Data flow
Data Flow is used to specify the order of send data and receive data.
"Forward Direction (Upper Byte
Swap (by Word)" can be used as the Data Flow.
• Forward Direction and Reverse Direction: Available when the Data Length is 2 bytes or more.
• Byte Swap: Available only when the Data Length is 4 bytes.
(c) Calculating range for the length
The following shows the specification examples of calculating range for the length.
Packet
Packet
element 1
element 2
Packet format
Static data
Length
Example 1
Example 2
Example 3
Lower Byte)", "Reverse Direction (Lower Byte
Packet
element 3
Non-conversion
variable
Calculating
range for
the length
Calculating range for the length
Calculating range for the length
Example 1) Calculating range when its start is 3 and end is 3
Example 2) Calculating range when its start is 3 and end is 30
Example 3) Calculating range when its start is 1 and end is 32
Upper Byte)", and "Byte
Packet
Packet
Packet
element 30
element 31
element 32
Static data
Static data
Static data
APPENDICES
A
387