Mitsubishi Electric QJ71E71-100 User Manual page 103

CHAPTER 8 CONNECTING MELSOFT PRODUCTS AND A GOT
4.
Select "Ethernet Module" under "PLC side I/F" and
double-click the item. The window shown to left
appears. Set the station number and the IP address
according to the network parameters.
5.
Set "Other Station Setting" and "Network
Communication Route" when required.
6.
A Passive open process is performed on all the
MELSOFT products connected to the network. (The
E71 will wait for an Active open request to itself.)
8
101