Mitsubishi Electric QJ71E71-100 User Manual page 310

(b) Send area
Buffer memory name
Dedicated instruction normal
completion count
Dedicated instruction
abnormal completion count
Number of mails normally
completed
Attached file sending count
Sending to the server count
Number of mails abnormally
completed
Error log write count
Sending error log write pointer
Error code
Command code
To
Error log
block
Date
Subject
*1 A sending error log block area consists of 16 error log blocks that have the same data order.
308
Address
The cumulative number of normal completions of the dedicated instruction (MSEND) is
stored.
5B39
• 0: The MSEND instruction has not been executed or no executions have resulted in normal
H
completion.
• 1 or more: The cumulative number of normal completions of the MSEND instruction
The cumulative number of abnormal ends of the dedicated instruction (MSEND) is stored.
• 0: The MSEND instruction has not been executed or no executions have resulted in
5B3A
H
abnormal end.
• 1 or more: The cumulative number of abnormal ends of the MSEND instruction
The cumulative number of sent e-mails forwarded by the E71 to the send mail server is
stored.
5B3B
H
• 0: No mail has been sent.
• 1 or more: The number of normal completions of mail sending
The cumulative number of e-mails with an attachment sent by the E71 is stored.
5B3C
• 0: No e-mail with an attachment has been sent.
H
• 1 or more: The number of normal sending of e-mails with an attachment
The cumulative number of e-mails sent by the E71 to the send mail server is stored.
5B3D
• 0: No e-mail has been sent to the server.
H
• 1 or more: The cumulative number of sending e-mails to the server
The cumulative number of communication errors returned in response to send requests to the
send mail server is stored.
5B3E
H
• 0: No communication error between servers or no e-mail sent
• 1 or more: The cumulative number of communication errors
The cumulative number of registrations in the send error log block area is stored.
5B3F
• 0: No error or no inquiry to the server
H
• 1 or more: The cumulative number of writes to the error log block area
The number of the error log block where the latest send error log is registered is stored.
• 0: No error (no registration of sending error log)
• 1 or more: The number of the error log block where the latest sending error log is
registered.
5B40
H
If the pointer value is 8, it means that the latest error log is registered in the receiving error log
block 8 area. When the number of receiving errors reaches nine, the error log is then
registered in the error log block 1 area again.
5B41
An error code indicating the error details is stored.
H
5B42
The system command code of the error message is stored.
H
The first eight words of the receiver's e-mail address of the error e-mail in the communications
with the mail server are stored in the ASCII code.
5B43
H
(Example) If the sender's e-mail address is "use@from.add.sample.co.jp",
"use@from.add.sam" is stored in the ASCII code.
The date and time when the e-mail was sent are stored in the BCD code (similar to 5883
5B4B
H
(a)).
The first 15 words of the e-mail subject are stored. A subject is not stored successfully if it
5B4F
H
contains characters other than alphanumeric and ASCII code characters.
Description
*1
of
H