Mitsubishi Electric QJ71E71-100 User Manual page 332

Error
code
C118
System error (The OS detected an error.)
H
C119
There is no received mail.
H
C11A
The received mail failed to be converted.
H
An e-mail was sent and an error mail was received from
C11B
H
the mail server of the destination.
C11D
The attachment size exceeded the allowable size.
H
C120
The SMTP server could not be opened.
H
Communications cannot be performed with the SMTP
C121
H
server. (Error response)
Communications cannot be performed with the SMTP
C122
H
server. (Abort)
Communications cannot be performed with the SMTP
C123
H
server. (Reset response)
C124
A response from the SMTP server timed out.
H
C125
Forcefully disconnected from the SMTP server
H
C126
The SMTP server could not be closed.
H
C127
Closing the SMTP server gave an error response.
H
The communication channel is closed because the
C130
H
service is not available.
The SMTP server is in process, and an error response
C131
H
was received.
The SMTP server is in process, and an error response
C132
H
was received. (Local error)
The SMTP server is in process, and an error response
C133
H
was received. (Insufficient memory area)
330
Error description
• Follow the procedure below.
(1) Check if each module is properly mounted on the base unit.
(2) Check if the operating environment of the Ethernet module
conforms to the general specifications of the CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the manual for
each module.
If the actions above do not solve the problem, please consult your
local Mitsubishi representative.
• Read Mail information storage area (address: 2682
memory and read received e-mails remaining on the server.
• Check that the e-mail is not compressed or encrypted.
• Check if the e-mail specifications, such as the encoding/decoding
style and file format, on the sending side are the same as those for
the Ethernet module.
• Check if the sending side has not divided the file.
• Receive an e-mail with an unknown destination and unknown
destination server from the SMTP server.
(The received mail is stored in the mail buffer.)
• Check if the portion before "@" is correct in the mail address
setting in the parameter settings.
• Check if the portion before "@" has been registered on the
destination mail server.
• Check if the attachment size is 6K words or less.
• Check that the sending side has not divided the attachment.
• Check that the port number of the SMTP server is 25.
• Check if communications with the SMTP server can be performed
using the PING command.
• Check if the SMTP server is busy.
• Check if the SMTP server is busy.
• Check if the SMTP server is busy.
• Check for an error in the SMTP server.
• Check if the network is heavily loaded.
• Check for an error in the SMTP server.
• Check if the network is heavily loaded.
• Check for an error in the SMTP server.
• Check if the network is heavily loaded.
• Check for an error in the SMTP server.
• Check if the network is heavily loaded.
• Check the status of the SMTP server.
• Check that a user name not registered in the server has not been
specified.
• Send the e-mail again after a certain period of time.
• Check the status of the SMTP server.
• Check the status of the SMTP server.
Action
) of the buffer
H