5.8.3 Adjusting the depth
Requirements:
•
Allen key 5 mm
Loosen the screws A that allows the support pads to slide
1.
forwards and backwards.
2.
Adjust the supports to the desired position.
3.
Re-tighten the screws.
5.9 Adjusting and removing the tray
CAUTION!
Injury hazard or material damage if a mobility
device which is fitted with a table is transported
in a vehicle
– If a table is fitted, always remove it before transporting
the mobility device.
1578997-C
Adjusting the mobility device to the user's seating posture
5.9.1 Laterally adjusting the tray
1.
Loosen wing-screw (1).
2.
Adjust tray towards the left or right.
3.
Re-tighten wing-screw.
5.9.2 Adjusting the depth of the tray / removing the
tray
49