Setting The Length Of The Leg Rest; Setting The Angle Of The Footplate; Setting The Angle And Height Of The Calf Pad - Invacare TDX SP2 Series User Manual

1. Hold the leg rest securely.
2. Pull the lever (1).
3. Push the leg rest into the required position.

5.10.3 Setting the length of the leg rest

Tools:
•
3/16'' (4.8 mm) Allen key
You can adjust the length of the leg rests independently of one
another.
1. Release the bolts (1) on the rear of the leg rest using the Allen
key.
2. Set the desired length.
3. Retighten the bolts.
1578997-C
Adjusting the mobility device to the user's seating posture

5.10.4 Setting the angle of the footplate

Tools:
•
5/32'' (4 mm) Allen key
1. Fold the footplates up in order to access the adjusting screws (1).
2. Set the adjusting screws using the Allen key.
3. Fold the footplate down again.

5.10.5 Setting the angle and height of the calf pad

Tools:
•
3/16'' (4.8 mm) Allen key
1. Fold the calf pad forward in order to access the bolt (1).
2. Loosen the bolt using the Allen key and adjust the calf pad to
the required angle and height.
3. Retighten the bolt.
4. Fold the calf pad back.
51