Transporting The Mobility Device Without Occupant - Invacare TDX SP2 Series User Manual

Seat belts may not be held at a distance from the user's body using
parts of the wheelchair such as armrests or wheels.
The pelvic belt should be positioned in the area between the user's
pelvis and thighs so that it is unobstructed and not too loose. The
ideal angle of the pelvic belt to the horizontal is between 45° and 75°.
1578997-C
The maximum permissible angle is between 30° and 75°. The angle
should never be less than 30°!
The safety belt installed in the transporting vehicle should be applied
as shown in the illustration above.
1) Center line of the body
2) Center of the sternum
8.4 Transporting the mobility device without
occupant
CAUTION!
Risk of injury
– If you are unable to fasten your mobility device
securely in a transport vehicle, Invacare recommends
that you do not transport it.
Transport
87