Invacare TDX SP2 Series User Manual page 81

4.
CAUTION!
Risk of crushing
The seat can fall down a few centimeters when
removing the actuator without securing the seat.
– Hold the seat in position while removing the
actuator and then lower it carefully.
Only if a simple tilt is installed:
a. Remove the SL retainer A with a slotted screwdriver and
remove the bolt B.
Remove the Allen screws C.
b.
1578997-C
5.
Slide out the battery tray A with the batteries.
6. Disconnect the battery straps B.
7.
Remove the terminal cover from the battery terminals (1).
8. First undo the bolt on the negative terminal (black cable) with
the 11 mm jaw spanner.
9. After this, undo the bolt on the positive terminal (red cable).
CAUTION!
Risk of crushing
– The batteries are extremely heavy. Please ensure that
they do not fall to the ground when they are removed
from the chassis.
Electrical system
81