Adjusting The Height (Flip-Up Armrest); Adjusting The Height (Following Armrest); Changing The Resistance (Flip-Up/Following Armrest) - Invacare TDX SP2 Series User Manual

Loosen the screws A and move the armrest lengthwise.
1.
2. Tighten the screws.

5.3.4 Adjusting the height (flip-up armrest)

1. Loosen thumb screw A.
2. Adjust armrest to desired height.
3. Retighten thumb screw.
1578997-C
Adjusting the mobility device to the user's seating posture

5.3.5 Adjusting the height (following armrest)

Tools:
•
5 mm Allen key
•
13 mm open-ended spanner
Loosen the screw A and nut B and remove them.
1.
2. Adjust armrest to desired height.
3. Insert screw and nut and tighten.
5.3.6 Changing the resistance (flip-up/following
armrest)
The movement of the flip-up and following armrests can be set to
have greater or less resistance.
31