Invacare TDX SP2 Series User Manual page 19

Hide thumbs Also See for TDX SP2 Series:
Table of Contents

Advertisement

A
B Identification of the lashing eyes at the front and back:
C
1578997-C
If the mobility device is fitted
with a tray, it is imperative
that it is removed and safely
stowed when transporting the
mobility device in a vehicle.
This symbol indicates the
position of an anchor point
when using a lashing system
during transport.
If the symbol appears on a
bright yellow sticker, the
anchoring point is suitable for
fixation of the mobility device
in a vehicle for use as a vehicle
seat.
Warning that the mobility
device may not be used as a
vehicle seat
This mobility device does not
satisfy the requirements of
ISO 7176-19.
Identification label sticker on
the chassis at the right.
For details see below.
D
E
F
G
Safety
Warning regarding the use of
the lifter.
For details see below.
Indication of the maximum
width to which the armrest
can be set
Identification of the position
of the coupling lever for
driving and push operation
(only the right side visible in
the picture).
For details see below.
This wheelchair may be used
as a vehicle seat, but only if it
is equipped with a headrest
that has been approved by
Invacare for this purpose.
Always make sure
that the wheelchair is
equipped with a headrest
approved by Invacare
before using it as a
vehicle seat.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents