Adjusting The Seat Width; Adjusting The Seat Depth (Modulite Seat Unit) - Invacare TDX SP2 Series User Manual

Invacare® TDX SP2® Series
1.
Remove upper screw and friction cap A.
Remove small friction link B.
2.
3.
Remove hip pad with bracket, turn upside down and reinstall.
4. Insert friction link, friction cap, screw and tighten.
36

5.3.10 Adjusting the seat width

The telescopic seat support can be adjusted in four stages. The seat
width can thus be adjusted together with the adjustable seat plate or
the adjustable sling seat.
The description of how the width is adjusted is contained in the
service instructions for this mobility device. The service instructions
can be ordered from Invacare. However, they contain instructions
for specially trained service technicians and describe operations that
are not intended for the end user.

5.3.11 Adjusting the seat depth (Modulite seat unit)

The seat depth has a major influence on the selection of
the center of gravity of the seat. This impacts its dynamic
stability. If you make a major change to the seat depth the
center of gravity of the seat must also be adjusted. See
"Adjusting the center of gravity of the seat" in the service
instructions for this mobility device. The service instructions
can be ordered from Invacare. However, they contain
instructions for specially trained technicians and describe
operations that are not intended for the end user.
The numbers on the scale on the seat serve as a guide.
They do not stipulate any dimensions such as seat depth in
centimeters.
Tools:
•
6 mm Allen key
1578997-C