Heated Seats; Auto Comfort Systems - Jeep RENEGADE 2016 User Manual

Hide thumbs Also See for RENEGADE 2016:
Table of Contents

Advertisement

GETTING STARTED
Heated Seats — If Equipped
The heated seat switches are located on the instrument panel.
You can choose between two heating levels:
• Push the heated seat button
• Push the heated seat button
• Push the heated seat button
If the HI-level setting is selected, the system will automatically switch to LO-level
after approximately 145 minutes of continuous operation. At that time, the display
will change from HI to LO, indicating the change. The LO-level setting will turn OFF
automatically after approximately 60 minutes.
NOTE:
The engine must be running for the heated seats to operate.
Auto Comfort Systems — If Equipped
Vehicles equipped with Auto on Comfort, turning on the car the driver's heated seat
will automatically turn ON when temperatures are below 40° F (4.4° C).
• Persons who are unable to feel pain to the skin because of advanced age,
chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus-
tion or other physical condition must exercise care when using the seat heater.
It may cause burns even at low temperatures, especially if used for long periods
of time.
• Do not place anything on the seat or seatback that insulates against heat, such
as a blanket or cushion. This may cause the seat heater to overheat. Sitting in
a seat that has been overheated could cause serious burns due to the increased
surface temperature of the seat.
32
once to turn the HI setting ON.
a second time to turn the LO setting ON.
a third time to turn the heating elements OFF.
WARNING!

Advertisement

Table of Contents
loading

Table of Contents