Enhanced Accident Response System - Jeep RENEGADE 2016 User Manual

Hide thumbs Also See for RENEGADE 2016:
Table of Contents

Advertisement

GETTING STARTED

Enhanced Accident Response System

In the event of an impact, if the communication network remains intact, and the
power remains intact, depending on the nature of the event, the ORC will determine
whether to have the Enhanced Accident Response System perform the following
functions:
• Cut off fuel to the engine.
• Flash hazard lights as long as the battery has power or until the hazard light button
is pressed. The hazard lights can be deactivated by pressing the hazard light
button.
• Turn on the interior lights, which remain on as long as the battery has power or for
15 minutes from the intervention of the Enhanced Accident Response System.
• Unlock the power door locks.
• Turn off the Fuel Pump Heater.
• Turn off the HVAC Blower Motor.
• Close the HVAC Circulation Door.
Enhanced Accident Response System Reset Procedure
After the event occurs, when the system is active, a message regarding fuel cutoff is
displayed. Turn the ignition switch from ignition AVV or MAR to ignition STOP.
Carefully check the vehicle for fuel leaks in the engine compartment and on the
ground near the engine compartment and fuel tank before resetting the system and
starting the engine.
Depending on the nature of the event the left and right turn signal lights, located in
the instrument panel, may both be blinking and will continue to blink. In order to
move your vehicle to the side of the road, you must follow the system reset procedure.
Customer Action
1. Turn Ignition STOP. (Turn Signal
Switch Must Be Placed In Neutral State).
2. Turn Ignition MAR.
3. Turn Right Turn Signal Switch ON.
4. Turn Left Turn Signal Switch ON.
5. Turn Right Turn Signal Switch ON.
6. Turn Left Turn Signal Switch ON.
7. Turn Left Turn Signal Switch OFF.
(Turn Signal Switch Must Be Placed In
Neutral State).
22
Customer Will See
Left Turn Light Is OFF. Right Turn Light
BLINKS.
Right Turn Light Is ON SOLID. Left Turn
Light BLINKS.
Left Turn Light Is ON SOLID. Right Turn
Signal Light BLINKS.
Right Turn Light Is ON SOLID. Left Turn
Light BLINKS.
Left Turn Light Is ON SOLID. Right Turn
Light Is ON SOLID.
Left Turn light Is OFF. Right Turn Light is
OFF.

Advertisement

Table of Contents
loading

Table of Contents