Table of Contents
Advertisement
OPERATING YOUR VEHICLE
Headlight Delay
This feature provides the safety of headlight illumination for up to 90 seconds when
leaving your vehicle in an unlit area.
The time delay of the headlights is programmable between 0, 30, 60 and 90
seconds.
Headlight Delay Activation
To activate the delay feature, place the ignition in the STOP/OFF position while the
headlights are still on. Then, turn off the headlights within two minutes. The delay
interval begins when the headlight switch is turned off from the "Lowbeam" position.
If the headlight switch is in "Auto" position and headlights were on before Key OFF,
the delay interval begins automatically.
Headlight Delay Disable
The feature is disabled by turning on the headlights, the parking lights or by placing
the ignition in the MAR/RUN position.
If you shut off the lights before the ignition is turned on, they will turn off in the
normal manner.
NOTE:
The lights must be turned off within two minutes of placing the ignition in the
STOP/OFF position to activate this feature.
Flash-To-Pass
You can signal another vehicle with your headlights by lightly pulling the multifunc-
tion lever toward you. This will cause the headlights to turn on at high beam and
remain on until the lever is released.
40
Advertisement
Table of Contents
